PERFORMANCE EVALUATION OF SUGAR BEET TWO SPLIT HARVESTERS UNDER EGYPTIAN CONDITIONS | ||
| Misr Journal of Agricultural Engineering | ||
| Article 4, Volume 30, Issue 3, July 2013, Pages 627-644 PDF (727.1 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2013.100420 | ||
| Authors | ||
| H. ELSHABRAWY1; R. M. SALIM2; R. R. Barakat3 | ||
| 1Professor. of Agricultural Engineering, Faculty of Agriculture, Mansoura University, Egypt. | ||
| 2Senior Researcher of Agricultural Engineering , Agric. Eng. Res. Institute, Egypt. | ||
| 3Agricultural expert associate at the ministry of justice, Egypt. | ||
| Abstract | ||
| The main objectives of this study were to evaluate the performance of using two split of harvester for topping and lifting the sugar beet crop at the same time that means a complete harvesting process for sugar beet crop. Measuring indicators were tested for the two split harvester (Grimme BM300 and Rootster 604) at the tested forward speed (m/s), type of cleaning system (axial or turbine) and type of opal wheel driven (ground and hydraulically). It was found that using the tested harvester with turbine cleaning system and with hydraulically driven under forward speed of 5.8 km/h gave the best results in all treatments. Forward speed of 3.5 km/h gave desirable results with some measurements. Therefore it is advisable to use the harvester with hydraulically driven and turbine cleaning system with forward speed of 5.8 km/h that showed the best results while harvesting the sugar beet crop. | ||
| References | ||
|
Abd – Rabou. A.F., 2004. Manufacturing a small machine to suit harvesting sugar beet under Egyptian conditions. Ph. D., Thesis. Agric. Mech. Dept., Fac. Agric., Kafr El–Sheikh. Tanta Univ. P: 33-131.
Aly, A.H., 1998. Design and development of a sugar beet topper. Ph.D., Thesis. Agric. Mech . Dept., Fac. Agric., Ain Shams Univ. P: 57-146.
Awad, M.A., 2006. Developing of a pulling out mechanism for harvesting sugar beet crop. Ph.D. Thesis. Agric. Eng. Dept., Fac. Agric., Mansoura Univ. P: 28-
Ivancan. S; Sito .S. And G . Fabiganic.2002. Bodenkultur .53 (3):161-166.
Kepner, R.A.; R. Baine and E.L Barger (1982) Principles of farm machinery, 2nd Ed. CBS Publisher, Distributors, India, : 464-468.
Khalil.N.A.,2007. Design and construction of sugar beet harvesting machine suitable for Egyptian condition. M.Sc., Thesis. Production Eng. And Mechanical Design. Dept., Fac, Engineering. Tanta Univ. P: 39-129.
Kromer, K.H.;M.Thelen And P . Degen. 1998. States Of Sugar Beet Harvesting In Europe: Comparison Of Harvesting Systems Zuck. Germany . 123(10) : 816-821.
Richey, C.B., P. Jacobson. and C. Hall., 1961. Agricultural engineers’ Hand book. McGrow – Hill books Co, INC. New – York. USA. P: 270 – 274.
Suliman, A.E.; G.E.M. Nasr and W.M.I. Adawy (1993). Energy requirements for land preparation of peas crop under Egyption conditions. Misr. J. Agric., 10(2): 190-206.
SharobeemY.F;I.M. Abd El-Tawwab and S. El-Khawaga.,2003. Design And Construction Of A Three Row Lifting Machine For Sugar Beet Misr, Jou, Agr , Eng , 20. (4), 980-992. | ||
|
Statistics Article View: 129 PDF Download: 227 |
||
