EFFECT OF EXTRUSION CONDITIONS ON THE PHYSICAL PROPERTIES OF HIGH PROTEIN SNACKS | ||
| Misr Journal of Agricultural Engineering | ||
| Article 9, Volume 30, Issue 2, April 2013, Pages 425-446 PDF (596.56 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2013.102038 | ||
| Author | ||
| G.R. Gamea | ||
| Associate Professor,Department of Agricultural Engineering, Faculty of Agriculture, Minoufiya University, Egypt. | ||
| Abstract | ||
| Three blends were formulated from corn grits, rice grits and defatted soybean with different percentages. The blends were extruded using a single extruder with different operational conditions: temperature of the extruder ranged from 175 to180o, moisture content of the raw material were (13%, 15, 17 and 19% w.b.), screw speeds were (500, 600, 700, 800, and 900 r.p.m.) and feeding rates were at (1.6, 1.8, 2 and 2.2 kg/min).Therefore, the extrudates were dried at 160 Co for 3min. Technical aspects and other physical and functional properties of the extrudates were studied.The samples were tested for sensory properties at zero time and after three months. Increasing the moisture content decreased the expansion rate while increasing both feed rate and screw speed increased the expansion rate.On the other hand increasing both moisture content and feed rate increased bulk density on contrary increasing screw speed decreased bulk density. In case of water absorption index (WAI), increasing moisture content increased WAI meanwhile increasing both screw speed and feed rate decreased WAI. As for water soluble index (WSI), increasing the moisture content, screw speed and feeding rate decreased WSI. The effect of storage (3 months) on the sensory properties including (taste, appearance, crispiness and overall acceptability) was very slightly since the scores given before and after storage were almost the same. | ||
| References | ||
|
Ahmed, A. S.; Ibrahim, N. A. Antiliafez, S.A. (1997). Biochemical evaluation for the effect of extruder temperature on soy protein. Food quality, 97(1) : 61-72
Almedia Dominguez, N.G.; Valencia, M.E. and Higera, I. (1990). Formulation of corn based snacks with high nutritive value, Biological sensory evaluation. J. Food St., 55(1): 228-231.
A.O.A.C. (1995) Association of Official Analytical Chemists (1995). 15th d., Published by A.O.A.C., 2200 Wilson Boulevard Arlington, Virginia 22201 U.S.A.
Bates, R.P.; Gvaham, H. O.; Matthews, R.F. and Close, L.R. (1991). Bread fruit chips: preparation, Stability and acceptability. J. Food Sci.. 56(6): 1680-1610.
Brncic, M.; Karlovic, S.; Bosijkov, T. Tripalo, Jezek, DandCugelj, I. (2008b). Enrichment of extruded snackproducts with whey proteins. Mijekarstvo, 58930, 275-295
Baskaran, V. and Bhattacharaya, S. (2004). Nutritional statuse of the protein of corn-soy based extruded products evaluated by rat bioassay. Plant Foods for Human Nutrition, 59, 101-104
Frame, N.D. (1994). The technology of extrusion cooking. Blacie Academic and Professional, An Lumprint of Chapman and Hall. WesterCleddens Road, BishopbiggesGlassow G642 Nz. Cited by Kabil, (2007)
Gujska, E. and Khan, K. (1991). Effect of temperature on properties of extrudates from high – starch fraction of navy, pinto and garbanzo beans. J. Food Sci., 55(2): 466-469.
Hamza, A.B. (1997). Chemical and nutritional and characteristics of weaning foods prepared from cereal and legumes. Ph.D. thesis, Dept. of Food Sc. And Tech., Fac. Of Agric., Cairo University.
Kabil, E.M.. (2007) Technological and nutritional studied on some snacks. M.Sc. Thesis, Dept of Food Science, Faculty of Agric., Minoufiya University, Egypt
Manisha, C.; Zakiuddin, S. and Bhattacharya, S. (1997). Twin-screw extrusion of rice flour without adie: Effect of barrel temperature and screw speed on extrusion and extrudate characteristics. J. Food Eng. 32: 251-267.
Parks, L.L. and Carpenter, J.A. (1987). Functionality of six nonmeat protein in meat emusion systems., J. Food Sc., 52(2):271-274
Ragab, H. G. (1992). Production of some snacks foods through extrusion processing of some cereal and their products. Ph.D. Thesis. Dept. Food Science. Faculty of Agric., Alazhar Univ. Cairo, Egypt
Ryu, G.H., Walker, C.E. (1995) The effect of extrusion conditions on the physical properties of wheat flour extrudates. Starch/Starke 47, 33-36.
Ryu, G.H., (2001). Effect of selected process parameters on expansion and mechanical properties of wheat flour and whole corn meal extrudates. Starch/Starke, 147-154
Saleh, S.S. (1996). Production and evaluation of extrudate from yellow corn grits blends. M.Sc. Thesis, Dept. of Food Sci. and Tec. Fac. Of Agric. Cairo University, Egypt
Santillan-Moreno, Marteniz, F.,Castano, E. and Amaya, S. (2009) Physicochemical characterization of extruded blends of corn starch-whey protein concentrate, Agave tequlana fiber. Food and Bioprocess technology, doi: 10.1007/s11947- 009-0223-x
Sheard, P. R. ; Ledward, D.A. and Mitheu, J. R. (1984). Role of carbohydrate in soybean extrusion, J. Food Tec. 19: 475-484
Stojceska, V.; Ainsworth, P. and Ibanoglu, S. (2009). The effect of extrusion cooking using different water feed rates on the quality of ready-to-eat snacks made from food by products. Food Chemistry, 114, 226 – 232.
Torun, B. Viteri, F.E. and Young, V.R. (1981). Nutritional role of soy a protein for humans., J. Am. Oil Chem. Soc. 58(3):400-406.
Wang, W.S. (1997). Starches an starch derivatives in expanded snacks. Cereal Food Warld. 42 (9): 743-745.
Weingartner, K.E.(1993). Nutrition of soybeans in (Soybeans processing for food uses) KukiatTanteeratarm Editor. Published by International Soybean Program, INTSOY Chmpaign U.S.A. | ||
|
Statistics Article View: 175 PDF Download: 352 |
||
