MATHEMATICAL MODELING OF TEMPERATURE AND HEAT PROFILES IN PILOT REFRACTANCE WINDOW DRYING SYSTEM | ||
| Misr Journal of Agricultural Engineering | ||
| Article 15, Volume 28, Issue 4, October 2011, Pages 999-1020 PDF (795.13 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2011.102614 | ||
| Author | ||
| B. M. A. Amer | ||
| Lec., Agric. Eng. Dept., Fac. of Agric., Cairo Univ., Egypt. | ||
| Abstract | ||
| The design of the Refractance Window (RW) drying system was based on a novel concept in which hot water is circulating beneath and in contact with a transparent plastic conveyor belt where a thin filmof puree is to be dried. A mathematical model that accounts for heat and mass transfer, and temperature buildup was developed for the RW pilot dryer. One set of equations was developed to predict temperatures of the Mylar plastic sheet and the product during the drying process. Another set of equations was developed to predict the heat requirements for drying of mango puree using the same system. This model was validated using the experimental results obtained at MCD Technologies, Inc., Tacoma, WA, USA. Good agreement was found among the temperatures obtained from experimental results and from the model. This model can be used to predict temperatures and heat profiles for the RW dryer for drying mango puree as well as other fruits and vegetables purees. | ||
| References | ||
|
Abonyi, B. I.; Feng, H.; Tang, J.; Edwards, C. G.; Mattinson, D. S. and Fellman, J. K. (2002). Quality retention in strawberry and carrot purees dried with Refractance Window System. Journal of Food Science, 67, 1051–1056.
Cengel, Y. A. (2003). Heat Transfer: A Practical Approach, 2nd ed., McGraw-Hill.
Incropera, F. P. and DeWitt, D. P. (1996).Introduction to Heat Transfer, pp. 368, 460-463, 685, John Wiley & Sons, New York.
Nindo, C. I.; Wang, S. W.; Tang, J. and Powers, J. R. (2003). Evaluation of drying technologies for retention of physical and chemical quality of green asparagus (Asparagus officinalis L.). Journal of Food Science and Technology (LWT), 36, 507–516.
Nindo, C. I.; Tang, J.; Powers, J. R. and Bolland, K. (2004). Energy consumption during Refractance Window evaporation of selected berry juices. International Journal of Energy Research, 28, 1089–1100.
Nindo, C. I.; Tang, J.; Cakir, E. and Powers, J. R. (2006). Potential of Refractance Window® (RW™) Technology for Value Added Processing of Fruits and Vegetables in Developing Countries. An ASABE Meeting Presentation. Paper Number: 068064
Nindo, C. I. and Tang, J. (2007). Refractance Window Dehydration Technology: A Novel Contact Drying Method. Drying Technology, 25: 37–48.
Nindo, C. I.; Feng, H.; Shen, G. Q.;Tang, J. andKang, D. H. (2007a). Energy utilization and microbial reduction in a new film drying system. Journal of Food Processing and Preservation, 27 (2): 117 – 136.
Nindo, C. I.; Powers, J. R. and Tang, J. (2007b). Influence of Refractance Window evaporation on quality of juices from small fruits. LWT 40, 1000–1007.
Rahman, S. (1995). Food Properties Handbook, CRC Press LLC, Boca Raton, Florida.
Ratti, C. and Mujumdar, A. S. (1995). Infrared drying. In Handbook of Industrial Drying; Mujumdar, A.S., Ed.; Marcel Dekker: New York, 567–588.
Sandu, C. (1986). Infrared radiative drying in food engineering: A process analysis. Biotechnology Progress, 2, 109–119.
Smith, T. M. (1994). Heat transfer dynamics. TAPPI Journal, 77, 239–245.
Sodha, M. S.; Bansal, N. K.; Kumar, A.; Bansal, P. K. and Malik, M. A. S. (1987). Solar Crop Drying. CRC Press, Inc. Boca Raton, Florida. | ||
|
Statistics Article View: 258 PDF Download: 279 |
||
