SHEAR BEHAVIOUR OF HIGH STRENGTH FIBER REINFORCED CONCRETE CORBELS | ||
| JES. Journal of Engineering Sciences | ||
| Article 2, Volume 40, No 4, July and August 2012, Pages 969-987 PDF (1.17 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.21608/jesaun.2012.114468 | ||
| Authors | ||
| Mohamed M. Ahmed1; Hesham Diab2; Ahmed Attia M. Drar3 | ||
| 1Associate professor, Civil Engineering Department, Assiut University | ||
| 2Lecturer, Civil Engineering Department, Assiut University | ||
| 3Demonstrator, Civil Engineering Department, Sohag University | ||
| Abstract | ||
| An experimental study of shear behaviour of high strength reinforced-concrete corbels with and without fibers was investigated. Seventeen high strength reinforced-concrete corbels were tested. The test variables were steel fiber content (Vf%), shear span-to-depth ratio (a/d), concrete strength (fcu), area of main steel reinforcement (Asm) and presence of horizontal stirrups. Test results showed that, addition of steel fibers or/and horizontal stirrups improves both shear strength and ductility of the tested corbels, and results in a more ductile failure mode. Test results were compared with shear strength predicted using ACI 38-08 equations and those proposed by other investigators. Comparison between the experimental and the predicted values of shear strengths showed that the model proposed by G. Campione et.al. [1], satisfactory predicted the ultimate load for high strength fiber reinforced-concrete corbels. | ||
| Keywords | ||
| Fiber reinforced concrete; High-strength concrete; Steel fibers; Shear behavior; Shear strength; Corbels | ||
|
Statistics Article View: 230 PDF Download: 576 |
||
