The Mechanical Properties of Biopolymer Composite Material Using in Compensation Jaws bones | ||
| Egyptian Journal of Chemistry | ||
| Article 27, Volume 64, Issue 2, February 2021, Pages 859-867 PDF (820.33 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ejchem.2020.32055.2681 | ||
| Authors | ||
| Alya'a Abdulkadhim Sabry* 1; Nihad Abdulameer Salih2 | ||
| 1University of Muthanna, College of Education for Pure Science, Department of Mathematics, 66001 Muthanna, Iraq. University of Babylon, College of Science, Department of Physics, 51002 Hilla, Iraq. | ||
| 2University of Babylon, College of Science, Department of Physics, 51002 Hilla, Iraq | ||
| Abstract | ||
| The aim of this paper is to prepare biopolymer composite material used to compensate for the jaws bones, where the characteristics of poly(methyl methacrylate) resin were developed by addition hydroxyapatite powder as a reinforcement material and studying the effect of selected weight fractures (1,2,3,4,5,6,7,8,9, and 10) wt.% to the polymeric blend (bone cement) on the tensile strength, maximum stress, modulus of elasticity and elongation percentage at break, and before that microstructure analysis was studied by using scanning electron microscope (SEM). the strength results are consistent with the (SEM) images that illustrated significantly increased agglomerates with increasing amount of hydroxyapatite powder. The results showed that the values of these properties increase at specific percentages of hydroxyapatite powder, while decreasing with increasing these percentages to a certain limit. The highest tensile strength value, elastic modulus and best elongation percentage at break were found in composite samples (45.159 MPa at 3%, 2.7365 GPa at 3%, 1.187 mm at 6%) respectively. | ||
| Keywords | ||
| Biocomposite materials; Poly (Methyl methacrylate); Jaws bones; Hydroxyapatite; Tensile characteristic | ||
|
Statistics Article View: 514 PDF Download: 475 |
||
