Optimization of Banana Stem Pulp to Substitute SoftWood Pulp for High Quality Paper | ||
| Egyptian Journal of Chemistry | ||
| Article 35, Volume 64, Issue 3, March 2021, Pages 1461-1469 PDF (727.95 K) | ||
| Document Type: Review Articles | ||
| DOI: 10.21608/ejchem.2020.46294.2954 | ||
| Authors | ||
| Mamduh Nassar1; Ebrahim Esmail Ebrahim2; Hisham Mohamed Sherif3; Mohamed Abdallah Ali* 2 | ||
| 1Minia university Faculty of engineering Chemical engineering department | ||
| 2Chemical engineering, faculty of engineering, Minia university, Minia, Egypt | ||
| 3Chemical Engineering Department, Faculty of Engineering, El-Minia University. El-Minia, Egypt. | ||
| Abstract | ||
| Abstract This study deals with optimizing pulping conditions of the banana stem to substitute softwood pulp in writing and printing paper. Scanning micrograph and chemical composition of banana stem indicate that banana fibers are flat, flexible, long (2.24 mm) and the raw banana is characterized with high cellulose (65%) and low lignin (13.5%)contents. The banana stem was pulped using Kraft process (8.5 % alkali as Na2O and 17% sulfidity cooked at 105oC for 3 hr. Detail mechanism of the pulping parameters was discussed. The obtained pulps were characterized with respect to yield (64%) and Kappa number (35%). Compared to imported softwood pulp, all strength properties and opacity are high. This is attributed to the long banana fibers and the high cellulose content. The effect of these two parameters on tensile, burst, and tear, strengths was discussed. High quality of writing and printing paper was obtained by a furnish blend ratio of 20%-80%, banana stem pulp, and commercial bagasse pulp respectively. Keywords: Banana Stem, Fiber length, Sulfate pulp, writing and printing papers. | ||
| Keywords | ||
| : Banana Stem; Fiber length; Sulfate pulp; writing and printing papers | ||
|
Statistics Article View: 2,165 PDF Download: 1,589 |
||
