PHYSICAL AND CHEMICAL PROPERTIES FOR STABILIZED SAND USING CEMENT KILN DUST | ||
| JES. Journal of Engineering Sciences | ||
| Article 4, Volume 38, No 3, May and June 2010, Pages 655-669 PDF (211.9 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.21608/jesaun.2010.124389 | ||
| Authors | ||
| El Sharif M. Abdel Aziz1; Ahmed K. Altohamy2; Ahmed R. Towfeek2 | ||
| 1Civil Eng. Dept., Faculty of Engineering, Assiut Unversity, Assiut, Egypt | ||
| 2Civil Eng. Dept., Faculty of Engineering, Al Azher Unversity, Qena Branch, Qena, Egypt | ||
| Abstract | ||
| Cement kiln dust (CKD) produced in a local cement production plant in Assiut Cement Company-Egypt, along with CKD resulting from combustion of cement were utilized as waste materials. These blends were tested for their water requirements for normal consistency, initial setting times, compression and tensile strengths. The materials used in this research are ``untreated'' CKD. It was collected from electrostatic precipitators and ordinary Portland cement (O.P.C). Several specimens were prepared in the laboratory for the compressive strength testing. The specimens were prepared by proportioning sand and CKD according to selected ratios then adding the optimum percentage of water | ||
| Keywords | ||
| cement kiln dust, ordinary Portland cement, cement blends; blend properties | ||
|
Statistics Article View: 116 PDF Download: 837 |
||
