THE ABILITY OF COFFEE TO STAIN NANOHYBRID COMPOSITE RESINS | ||
| Alexandria Dental Journal | ||
| Article 3, Volume 46, Issue 1, April 2021, Pages 91-95 PDF (575.1 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/adjalexu.2021.144862 | ||
| Authors | ||
| Youssef A. Soliman* 1; Elsayed M. Mahmoud2; Mohammed H. Gepreel3; Rania R. Afifi4 | ||
| 1BDS, Faculty of Dentistry, Alexandria University, Egypt | ||
| 2Professor of Conservative Dentistry, Faculty of Dentistry, Alexandria University, Egypt | ||
| 3Professor of Materials Science and Engineering, E-JUST, Egypt | ||
| 4Lecturer of Conservative Dentistry, Faculty of Dentistry, Alexandria University, Egypt | ||
| Abstract | ||
| INTRODUCTION: One of the main causes of composite replacement is its discoloration after prolonged exposure to the oral environment. In an effort to fulfill the patient esthetic desire, harmonize composite material have been introduced with limited studies regarding its esthetic properties and color stability. OBJECTIVES: To study the effect of coffee on the color stability of two nanohybrid composites with different monomers. MATERIALS AND METHODS: The resin composites tested were Venus diamond and Harmonize. A custom made disk-shaped mold (4mm thickness x 8 mm diameter) used to prepare 12 composite specimens. They were divided into 2 groups (n=6) according to the resin based composite that was used as follow: Group A restored with Urethane dimethacrylate based composite (Venus diamond, Heraeus Kulzer) and Group B restored with Bisphenol A diglycidil dimethacrylate based composite (Harmonize, Kerr). The specimens were finished using (Multi fluted tungsten carbide finishing bur for fifteen seconds) followed by polishing using (HiLuster, Kerr) polishing system. After that, the specimens were immersed in coffee solution for 7 days. Color difference ΔE was calculated before and after immersion of specimens for 48 hours and after 7 days using spectrophotometer (VITA easy shade). RESULTS: Mann Whitney U test showed significant difference in ΔE among composite restorative materials (p < 0.05). Venus diamond composite resin was found to be more stain-resistant than Harmonize composite resin after both 48 hours and 7 days. CONCLUSION: Different monomer compositions, immersion time and solution may have direct effect on the color stability of nanohybrid restorative materials. | ||
| Keywords | ||
| Color stability; Composite resins; Monomers; Coffee and Nanohybrid | ||
| References | ||
|
1. Abd Elhamid M, Mosallam R. Effect of bleaching versus repolishing on colour and surface topography of stained resin composite. Aust Dent J. 2010; 55:390-8. 2. Barakah HM, Taher NM. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material. J Prosthet Dent. 2014;112:625-31. 3. Alawjali SS, Lui JL. Effect of one-step polishing system on the color stability of nanocomposites. J Dent. 2013; 41:e53-61. 4. Kocaağaoğlu H, Aslan T, Gürbulak A, Albayrak H, Taşdemir Z, Gumus H. Efficacy of polishing kits on the surface roughness and color stability of different composite resins. Niger J Clin Pract. 2017;20:557-65. 5. Marchesi G, Breschi L, Antoniolli F, Di Lenarda R, Ferracane J, Cadenaro M. Contraction stress of low-shrinkage composite materials assessed with different testing systems. Dent Mater. 2010;26:947-53. 6. Antonson SA, Yazici AR, Kilinc E, Antonson DE, Hardigan PC. Comparison of different finishing/polishing systems on surface roughness and gloss of resin composites. J Dent. 2011; 39:e9-17. 7. Ereifej NS, Oweis YG, Eliades G. The effect of polishing technique on 3-D surface roughness and gloss of dental restorative resin composites. Oper Dent. 2013;38:E1-12. 8. Daud A, Gray G, Lynch CD, Wilson NHF, Blum IR. A randomised controlled study on the use of finishing and polishing systems on different resin composites using 3D contact optical profilometry and scanning electron microscopy. J Dent. 2018; 71:25-30. 9. Ergucu Z, Turkun LS, Aladag A. Color stability of nanocomposites polished with one-step systems. Oper Dent. 2008; 33:413-20. 10.Guler AU, Guler E, Yucel AC, Ertas E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108-12. 11.Tavangar M, Bagheri R, Kwon TY, Mese A, Manton DJ. Influence of beverages and surface roughness on the color change of resin composites. J Investig Clin Dent. 2018;9:e12333. 12.Hafez R, Ahmed D, Yousry M, El-Badrawy W, El-Mowafy O. Effect of in-office bleaching on color and surface roughness of composite restoratives. Eur J Dent. 2010;4:118-27. 13.Marigo L, Nocca G, Fiorenzano G, Callà C, Castagnola R, Cordaro M, et al. Influences of Different Air-Inhibition Coatings on Monomer Release, Microhardness, and Color Stability of Two Composite Materials. Biomed Res Int. 2019; 2019:4240264. 14.Chan KC, Fuller JL, Hormati AA. The ability of foods to stain two composite resins. J Prosthet Dent. 1980;43:542-5. 15.Ergücü Z, Türkün L, Aladag A. Color stability of nanocomposites polished with one-step systems. Oper Dent. 2008; 33:413-20. 16.Hosoya Y, Shiraishi T, Odatsu T, Nagafuji J, Kotaku M, Miyazaki M, et al. Effects of polishing on surface roughness, gloss, and color of resin composites. J Oral Sci.2011;53:283-91. 17.Um CM, Ruyter I. Staining of resin-based veneering materials with coffee and tea. Quintessence Int. 1991;22. 18.Marjanovic J, Veljovic DN, Stasic JN, Savic-Stankovic T, Trifkovic B, Miletic V. Optical properties of composite restorations influenced by dissimilar dentin restoratives. Dent Mater. 2018;34:737-45. 19.Roselino L, Tonani Torrieri R, Sbardelotto C, Alves Amorim A, Noronha Ferraz de Arruda C, Tirapelli C, et al. Color stability and surface roughness of composite resins submitted to brushing with bleaching toothpastes: An in situ study. J Esthet Restor Dent. 2019. 20.Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006;95:137-42. 21.Khokhar ZA, Razzoog ME, Yaman P. Color stability of restorative resins. Quintessence Int 1991;22:733-7. 22.Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005;33:389-98. 23.Schmidt C, Ilie N. The mechanical stability of nano-hybrid composites with new methacrylate monomers for matrix compositions. Dent Mater. 2012;28:152-9. | ||
|
Statistics Article View: 717 PDF Download: 1,029 |
||
