CHEMICAL ANALYSIS OF ORDINARY PORTLAND CEMENT OF JORDAN التحليل الکيماوي لألسمنت األردني البورتالندي العادي | ||
| Assiut University Bulletin for Environmental Researches | ||
| Article 1, Volume 14.1, Issue 14.1, March 2011, Pages 1-9 PDF (128.15 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/auber.2011.148886 | ||
| Abstract | ||
| ABSTRACT: This study compares the quality of different brands of ordinary Portland cement (OPC) available in Jordan. The amounts of chemical constituents such as Silica SiO2, Al2O3, CaO, MgO,Sulfuric anhydride (SO3) were determined in accordance with British Standard (BS) specifications. All the results are presented to provide both quantitative and qualitative notion that several locally produced ordinary compositions of most of these constituents as determined experimentally were within the range of the standard values. The possible reasons for variation in chemical compositions and their consequences have been discussed. هـــذه الدراســـة تقـــارن جـــودة الأســـمنت البورتلانـــدي العـــادي الـــذي ينـــتج مـــن قبـــل شـــرکات مختلفـــة فـــي الأردن، وکميـــــة احتوائـــــه مـــــن المـــــواد الکيميائيـــــة مثـــــل: الجيـــــر الحـــــر، والخســـــائر الناتجـــــة عـــــن اشـــــتعال ٍ کـــــل مـــــن ً للمواصـفة القياسـية البريطانيـة. وقـد أظهـرت جميـع النتـائج تـوفر کميـة طبقـا ،Al2O3, SiO2, MgO, CaO, SO3 ً فـي الإطـار العملـي مـن خـلال المکونات للمنتجات المختلفة، والتراکيـب العاديـة لمعظـم هـذه المکونـات المحـددة سـابقا حزمة المواصفات القياسية، وکذلک تمت مناقشة الأسباب المحتملة للاختلاف في الترکيب الکيماوي، وما يترتـب علـى ذلک من مخاطر. | ||
| References | ||
|
REFERENCES: 1-Iffet Yakar Elbeyli, Emek Möröydor Derun, Thermal analysis of borogypsum and its effects on the physical properties of Portland cement, Cem. Concr. Res., 2003. 33(11): PP. 1729-1735. 2-S. Ali, I. A. Khan and M. I. Hossain, Chemical Analysis of Ordinary Portland Cement of Bangladesh, Chemical Engineering Research Bulletin, 2008, 12 PP: 7-10. 3-British standard Institutes, Section BS 4550: Part 2: 1970 and BS 12: 1991. 4-Taylor H.F. W., The Chemistry of Cements. Vol. 1. 1946, New York: Academic Press. 5-Furman N.H., et al., Standard Method of Chemical Analysis, 6th ed. 1962, New York: Van Nostrand Reinhold Co. 6-Amin N., Ali K. and Shah M., Raw mix designing, clinkerization and manufacturing of high strength Portland cement from the lime stone and clay of Darukhula Nizampur, District Nowshera, N.W.F.P., Pakistan, Chinese journal of geochemistry, 2009. 28(3): PP. 279–283. 7-Neville A.M., Concrete Technology, 4th ed. 1996, Singapore: Long man Singapore Publishers Ltd. 8-Pandey G.N. and S. D. Shukla, A Text Book of Chemical Technology. Vol. 1. 1980, New Delhi: Vikas Publishing House. 9-J. Bensted, Early hydration behaviour of portland cements containing boro-, citro- and desulphogypsum. Cem. Concr. Res. 1980, 10, P. 165. 10-Noor-ul-Amin, Khurshid Ali, Chemical Analysis and Comparison of Ordinary Portland Cement of Pakestan, Chemical Engineering Research Bulletin, 2010, 14, PP. 45-49. | ||
|
Statistics Article View: 359 PDF Download: 230 |
||
