DEVELOPMENT AND EVALUATION OF A MOUNTED TYPE MACHINE FOR FISH FEEDS DISTRIBUTION BY BLOWING AIR SYSTEM | ||
| Misr Journal of Agricultural Engineering | ||
| Article 58, Volume 25, Issue 4, October 2008, Pages 1207-1224 PDF (284.46 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/mjae.2008.158090 | ||
| Authors | ||
| B.E. Hemeda1; M. M. Abdel- Rahman2; A. F. Abdel-Mottaleb2 | ||
| 1Researcher, Agric. Eng. Res. Inst. (AEnRI), Giza, Egypt. | ||
| 2Senior Researcher, Agric. Eng. Res. Inst. (AEnRI), Giza, Egypt. | ||
| Abstract | ||
| This research was intended to develop and evaluate a mounted type machine for fish feeds distribution by blowing air system. The performance of the developed machine in terms of accuracy of feed distribution (uniformity of feed distribution) was investigated. In this study, three machine parameters each of four levels were studied such as, tractor forward travel speed (2.22, 3.51, 4.83 and 6.13 km/h), blower revolving speed (1500, 2000, 2500 and 3000 rpm), and aquatic feed rates (4, 8, 12 and 16 kg/min). All experiments were conducted using sinking type of aquatic feed pellets. The optimum operating parameters for the modified feed blowing machine were 16 kg/min feeding rate, 3000 rpm for blower revolving speed (22.9 m/s air speed) and 4.83 km/h tractor traveling speed. At these values using the modified machine, a satisfactory coefficient of uniformity (C.U.) of 0.947 and permissible coefficient of variation 12.92 % were obtained. Moreover, using these parameters gave the highest distribution width (10 m) was obtained which provide equal feeding opportunities for as many fish as possible. | ||
| References | ||
|
Abd-Elhamid, M. A. (1994). Scientific Fundamentals of Fish Productions. Published by Dar-Elwafa Book Company. Shrif St, Cairo - Egypt. In Arabic: 137 - 144. Academy of Sci. Res. and Tech. (1996). Future of Fish Cultures in Egypt. Special issues. May 1996. In Arabic. Academy of Sci. Res. and Tech. (2001). 4th Conference of Animal and Fish Research Council. November 2001. In Arabic. ASAE Standards. (2000). ASAE (S358) Determination of Forage Moisture Content. ASAE Standards 2000, St. Joseph, MI: ASAE.
ASAE Standards. (2004). ASAE (S341.3) Procedure for Measuring Distribution Uniformity And Calibrating Granular Broadcast Spreader. ASAE Standards, 198-201, St. Joseph, MI: ASAE.
Coates, W. (1992). Performance evaluation of a pendulum spreader. Trans of the ASAE, 8 (3): 285-288. Curt B. and B.Eric. (1998). Tilapia Fish Farming Equipment and Suppliers. Technical Guide for Tilapia Farming (CDI, 1998, 51 p.). Part 3: Fish Farming Equipment and Recommended European Suppliers. EL- Masry, M.M.I (2008). The Role Of Fish Farming In Solving The Problem Of Gap In Protein. J. Agric. Sci. Mansoura Univ., 33 (2): 1583-1607. EL-Raie, A.E.S.; N.A. Hendawy and A.Z. Taib (1996). Study of Physical and Engineering Properties for Some Agricultural Products. Misr J. Ag. Eng., 13(1) 211-226. FAO (Food and Agriculture Organization of the United Nations). (1984). United Nations Development Programme. In Inland Aquaculture Engineering, Budapest, (Chapter 19). FAO Publications, Via delle Terme di Caracalla, 00100Rome, Italy.
FAO (Food and Agriculture Organization of the United Nations). (2005). The State Of World Fisheries And Aquaculture, Rome. Hasan M.R.(2001). Nutrition and Feeding for Sustainable Aquaculture Development in the Third Millennium. Department of Aquaculture, Bangladesh Agricultural University, Mymensingh 2202, Bangladesh. Technical Proceedings of the Conference on Aquaculture in the Third Millennium, Bangkok, Thailand, 20-25 February 2000. pp. 193-219. NACA, Bangkok and FAO, Rome. Higuera, R. (2002). World Shrimp Farming. Factors Affecting Production. Hand Feeding Versus Mechanical Feeding. bob@shrimpnews.com.
Jha. S. N. (1998). Physical and Hygroscopic Properties of Mekhona. J. Ag. Eng, Res. 72 (2):145-150. Matouk A. M.; M. M. El-Kholy; A. S. Hamam; and T. R. Ewis. (2005). Aerodynamic Charac. for Different Varieties of Some Cereal. Misr J. Ag. Eng., 22 (3) 1086-1102. Miles R. D. and A. C. Frank. (2007). The Role of Nutrient-Dense Feeds in Aquaculture. University of Florida, Institute of Food and Agricultural Sciences (UF/IFAS).
Ministry of Ag. and Land Recla., (2003). Semi-intensive of fish culture. General authority for fish development. Egypt. (In arabic).
MSU (MississippiStateUniversity Extension Service). (2007). Catfish Feeds and Feeding Search MSUCares Catfish/Aquaculture Publications. Osman, M. F. (2008). Technicals of fish feedings. Unpublished data. World fish center. Egyptian fish council. Shree S. N. and J. P. Bolte. (1997). Application of systems models for evaluation and optimization of pond management practices. Optimization of feed application rates. Department of BioresourceEngineeringOregonStateUniversityCorvallis, USA Technical Report 1997. Srivastava , A. K ;C. E. Goering and R. P. Rohrbach. (1995). Engineering principles of agricultural machines .ASAE Textbook Number 6 published by the American Society of Agricultural Engineers. Váradi, L. (1995). Mechanized Feeding in Aquaculture. Fish Culture Research Institute. Szarvas, Hungary . | ||
|
Statistics Article View: 221 PDF Download: 212 |
||
