Sherif, F., Elsayed, N. (2021). Factors affecting PAN nanofibers produced by electro-spinning technique. test, 11(3), 453-460. doi: 10.21608/idj.2021.164310
Fawzy S. Sherif; Noha Mohammed Abdo Elsayed. "Factors affecting PAN nanofibers produced by electro-spinning technique". test, 11, 3, 2021, 453-460. doi: 10.21608/idj.2021.164310
Sherif, F., Elsayed, N. (2021). 'Factors affecting PAN nanofibers produced by electro-spinning technique', test, 11(3), pp. 453-460. doi: 10.21608/idj.2021.164310
Sherif, F., Elsayed, N. Factors affecting PAN nanofibers produced by electro-spinning technique. test, 2021; 11(3): 453-460. doi: 10.21608/idj.2021.164310

Factors affecting PAN nanofibers produced by electro-spinning technique

International Design Journal
Article 33, Volume 11, Issue 3 - Serial Number 40, May and June 2021, Pages 453-460    PDF (606.2 K)
Document Type: Original Article
DOI: 10.21608/idj.2021.164310
Authors
Fawzy S. Sherif1; Noha Mohammed Abdo Elsayed2
1Assistant Professor, Department of Clothing and Textiles, Home Economics Faculty, Menoufia University, Egypt
2Ass. Prof at home economics faculty, Menoufia University, Email: noha_mabdo@yahoo.com
Abstract
In recent decades, nanotechnology has become one of the most important modern trends in many industries (Subbiah, T, et al: 2005). Spinning and weaving industry is not far from this modern technology. Electro spun nanofibers have become the most common fibers in many vital applications such as sensors, tissue engineering, wound dressings, filtration, pharmacology, optical and electronic applications and other fields (Lannuttia, J, et al: 2007),(Matthew, T, et al: 2008), (Homaeigohar, S. S: 2011), (Lilin, L, et al: 2017) Problem of study: The polyacrylonitrile polymer (PAN) is one of the most widely used organic polymers. It has many properties that qualify it to be applied in various fields (Heikkilä, P. and Harlin, A: 2009). The problem of this study is how to produce fine nanofibers of regular diameters of PAN polymer by electro-spinning technique, in order to be used in various applications. Objectives: This study aims to study the effect of differences in electric voltages, viscosity of the polymeric solution, and other factors on the properties of the produced PAN nanofibers. It aims also to Utilize the (SEM) microscopic technology to study the nature of the produced nanofibers. Methodology: By applying of electro-spinning technique, nanofibers were produced from polyacrylonitrile polymer (PAN) by using different electrical voltages (17 KV, 20 KV, 23 KV), as well as using different viscosity rates of the polymeric solution (5%, 10%, 15%), in order to obtain the most appropriate variables that help to produce the best image of the fibers in terms of accuracy of the diameters, their symmetry, and their purification from polymeric beads that reduce the efficiency of fibers. Results: The results showed that the diameter of the electro spun polyacrylonitrile (PAN) fibers increased with increasing of the polymeric solution viscosity and the electrical voltage. The diameter of the fibers decreases with the decrease of the solution viscosity and the electrical voltage. The best parameters that lead to the production of fine PAN nanofibers with similar diameter and good appearance are; electric voltage of 23 kV, and viscosity of 10% of the polymeric solution. This study recommended the necessity of completing research and studies in the field of electro spinning of nanofibers, because of its great importance in nanofibers production with fine diameters, which can be used and applied in many fields of applicationsThis study also focuses on all applications, whose products depend basically on the nanofibers produced by electro-spinning, and highlights a comprehensive statistical presentation of scientific research that has been produced related to this technology. This study showed that since 2000, there were an approximate 20% increase annually in the number of journal articles published around the world that use the concept of "electro-spinning" in their research.
Statistics have shown that USA, China and South Korea own nearly 70% of published articles, and the global market of nanofibers products has increased from 51.8 million dollars in 2007 to 67.1 million dollars in 2008 and to 80.7 million dollars in 2009, and to 101.5 million dollars by the end of 2010. This remarkable development has created an important strong economic market for nanofibers, which in turn led to the increase of manufacturers of nanofibers and production. According to statistics, it is expected that the global market for nanofibers products will grow from 927 million dollars in 2020 to $ 4.3 billion by 2023, with an annual growth rate of 36.2% for the period from 2020 to 2023.  
Keywords
Nanotechnology; Electro-spinning; Nanofibers; Functional textiles
References
    1. Subbiah, T.; Bhat, G. S.; Tock, R. W.; Parameswaran, S.; Ramkumar, S. S, 2005: Electrospinning of Nanofibers, Journal of Applied Polymer Science, vol. 96(2), pp 557-569.
    2. Lannuttia, J.; Renekerb, D.; Mac, T; Tomaskod, D.; Farsone, D, 2007: Electrospinning for tissue engineering scaffolds, Materials Science and Engineering Journal (C), vol. 27 (3), pp 504-509.
    3. Matthew, T.; Timothy, H.; Long, E, 2008: Electrospinning functional nanoscale fibers: a perspective for the future, vol. 57 (3), pp 385-389.
    4. Heikkilä, P.; Harlin, A, 2009: Electrospinning of polyacrylonitrile (PAN) solution: Effect of conductive additive and filler on the process, Polymer Letters Journal, vol.3(7), pp 437–445.
    5. Homaeigohar, S. S, 2011: Functional Electrospun Nanofibrous Membranes for water filtration, PhD Thesis, Technischen Fakultat der Christian-Albrechts-Universitat zu Kiel.
    6. Lilin, L., Peng, S., Kong, J., Lee, Y., Ji, D., Srinivasan, M., Ramakrishna, S., 2017: Electrospun hollow nanofibers for advanced secondary batteries, Nano Energy Journal, vol. 39, Pages 111-139.
Statistics
Article View: 293
PDF Download: 348