VERIFICATION OF NUMERICAL WITH EXPEREMENTAL RESULTS FOR TAPERED STEEL FRAMES | ||
| Journal of the Egyptian Society of Engineers | ||
| Article 8, Volume 53, Issue 1, December 2014, Pages 10-2 PDF (1.45 M) | ||
| Document Type: Scientific and technological | ||
| Author | ||
| Ayman Ibrahim Hammouda* | ||
| Abstract | ||
| This paper presents a comparative study between experimental results available in literature and a numerical analysis carried out by the authors dealing with the behavior of tapered steel frames. The effects of nonlinear stress-strain relationship, initial imperfections, and end-restraints (boundary conditions) are taken into consideration. ABAQUS is used for a nonlinear finite element model study. An experimental from literature test was used to verify the results obtained from ABAQUS. | ||
| Keywords | ||
| Tapered steel frames; Nonlinear analysis; Finite elements; Imperfections, | ||
| References | ||
|
1- ABAQUS, (2001) ABAQUS Standard User’s Manual, Version 6.3, Volumes 1 to 3, Hibbit, Karlsson & Sorensen, Inc., Pawtucket, Rhode Island, USA.
2- ABAQUS, (2001) ABAQUS Theory Manual, Version 6.3, Hibbit, Karlsson & Sorensen, Inc., Pawtucket, Rhode Island, USA.
3- Jong-Kook Hong [2007] “Development of A Seismic Design Procedure for Metal Building Systems”, University of California, San Diego
4- Jun Li and Guo-Qiang Li*[2002] “Large-scale Testing of Steel Portal Frames Comprising Tapered Beams and Columns” Advances in Structural Engineering Vol. 5 No. 4
5- Miller, B. S. and Earls, C. J. [2003] “Behavior of Web-Tapered Built-up I Shaped Beams”, Report CE/ST 28, University of Pittsburgh, Pittsburgh, PA.
6- Abbas et al. [2013] “Nonlinear Analysis of Steel Frames: Comparison Between Some Design Methods,” Journal of Al-Azhar University, Engineering Sector, JAUES, Vol. 8, No. 26, January 2013, Cairo, Egypt.
7- Hamouda Ayman. [2013] “Nonlinear Analysis of Steel Frames”, M. Sc. Thesis, Faculty of Engineering, Al Azhar University, Cairo, Egypt | ||
|
Statistics Article View: 80 PDF Download: 83 |
||
