Facile Approach to Enhance Disperse Printability and Antibacterial Functionality of Wool/Polyester fabric | ||
| Egyptian Journal of Chemistry | ||
| Article 42, Volume 65, Issue 3, March 2022, Pages 447-454 PDF (599.3 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ejchem.2021.93400.4411 | ||
| Author | ||
| Heba Khalil* | ||
| Faculty of Applied Arts, Helwan University, Cairo, Egypt | ||
| Abstract | ||
| In this study, wool/polyester (50/50) blended fabric was chemically modified using monochlorotriazinyl β-cyclodextrin (MCT-βCD) to create hydrophobic cavities onto/within the fabric structure. The introduced hydrophobic cavities had the ability to form inclusion complexes with both the disperse dye molecules and the selected antibacterial agents namely triclosan derivative, Invasan®, and hyperbranched poly (amid amine) loaded with nano silver, HBPAA/AgNPs composite, in subsequent disperse dyeing and functional finishing respectively. The obtained results revealed that chemical modification of wool/polyester structure using MCT- βCD (20g/L), followed by post-printing, and functional finishing with the nominated active ingredients, triclosan (10g/L) and AgNPs/HBPAA hybrid solution (10g/L) result in a significant improvement in the depth of the obtained disperse prints along with a noticeable increase in the imparted antibacterial functionality against the tested harmful pathogens namely Gram-positive (G+ve: S. aureus) and Gram-negative (G-ve: E. coli) bacteria. On the other hand, the SEM and EDX analysis has confirmed both the deposition of MCT- βCD onto the fabric surface as well as immobilization and fixation of the used bioactive agents. | ||
| Keywords | ||
| Wool/polyester fabric; MCT-βCD; Pre-modification; Post-disperse printing; Subsequent antibacterial finishing | ||
|
Statistics Article View: 315 PDF Download: 267 |
||
