FIRE SUPPRESSION ANALYSIS FOR INDUSTRIAL BUILDINGS USING HYBRID SYSTEM | ||
| Engineering Research Journal (Shoubra) | ||
| Volume 48, Issue 1, April 2021, Pages 30-45 PDF (1.77 M) | ||
| Document Type: Research articles | ||
| DOI: 10.21608/erjsh.2021.227606 | ||
| Authors | ||
| M. Samy El Saadany1; A. Sharaf Eldin2; M. G. Higazy3; M. F. Abd Rabbo1; M. A. El Samanody4 | ||
| 1Faculty of Engineering, Shoubra - Benha University | ||
| 2Faculty of Engineering, October 6th University, | ||
| 3Faculty of Engineering, Shoubra - Benha University, | ||
| 4Faculty of Engineering, Ain Shams University | ||
| Abstract | ||
| The present work has employed the Fire Dynamics Simulator "FDS – PyroSim program" to analyze the computational design, the spread of fire and distribution of particles. The FDS is used in modeling the present standard hanger building, through studying the effectiveness of using different ratios of Nitrogen gas flow rate injection compared with water mist flow rate amount at various water mist particles size and different fire source positions such as center and corner on fire extinguishing time, that shows a pronounced optimum ratio results of 1:1. The results showed that time of fire suppression is decreasing with decreasing the droplet size and increasing the water mist flow rate. The best mixing ratio of Nitrogen gas with water mist is found to be 1.1 for minimum suppression time 175 second .and the total optimum Nitrogen flow rate is 60 l/min and the diameter of the water droplet is 50 μm; and of total flow rate 60 l/min. The FDS is also used for the smoke flow modeling in different ventilation conditions, tunnel fires and multi-floors buildings. | ||
|
Statistics Article View: 85 PDF Download: 285 |
||
