Modeling of Hydrogas Unit for Tracked Vehicle Suspension | ||
| International Conference on Aerospace Sciences and Aviation Technology | ||
| Article 9, Volume 16, AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 16 – May 26 - 28, 2015, May 2015, Pages 1-12 PDF (806.52 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/asat.2015.22887 | ||
| Authors | ||
| H. A. Hammad; A. M. Salem; I. Saleh Mostafa; I. A. Elsherif | ||
| Egyptian Armed Forces. | ||
| Abstract | ||
| Tracked vehicles equipped with conventional suspension are limited in their ability to achieve high mobility. This limitation is due to the linear characteristics and the consequent poorer ride performance [1-3]. Hydro gas suspension due to their inherent non-linear behavior can provide higher mobility and better ride comfort performance [4]. This paper aims to evaluate the characteristics of hydro-gas suspension system and apply this nonconventional system for the armored fighting carrier BMP-1. To achieve this goal, theoretical and experimental studies were carried out. The theoretical study includes modeling of the hydro gas suspension unit mathematically and validation of the developed model using MATLAB/SIMULINK. The experimental measurements are carried out to validate the results obtained from the model. The force, created inside the hydro gas unit during its action, includes the elastic and damping forces, the variation of such force with displacement and velocity of moving part are recorded (obtained). This variation is used as input parameters in the equation of oscillation of vehicle hull to study its vibration response. The obtained results show that the proposed hydro gas suspension system is more acceptable than the conventional one. | ||
| Keywords | ||
| tracked vehicle suspension; hydrogas suspension system; hedrogas unit | ||
|
Statistics Article View: 731 PDF Download: 1,490 |
||
