MULTILEVEL OPTIMIZATION OF LAMINATED COMPOSITE STRUCTURES | ||
| International Conference on Aerospace Sciences and Aviation Technology | ||
| Article 37, Volume 9, ASAT Conference, 8-10 May 2001, May 2001, Pages 1-16 PDF (2.01 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/asat.2001.24842 | ||
| Authors | ||
| NASR A. N.1; NEGM H. M.2 | ||
| 11General Manger A.O.I. Aircraft Engine Factory, Helwan, Cairo, Egypt. | ||
| 2Professor of Aircraft Structures, Aerospace Engineering Department, Cairo University. | ||
| Abstract | ||
| This paper presents a multilevel approach to the optimal design of laminated composites with consideration of natural frequency constraints The Ply thicknesses and orientations are designed to minimize the volumes of plates subjected to constraints on the first natural frequency. The optimization process is carried out in a dual scheme. In the first optimization level the optimal ply orientations which give the maximum natural frequency are determined. In the second level the optimal ply thicknesses are determined so as to minimize the structural weight, while maintaining the ply angles obtained in the first level. The process is repeated several times until convergence is obtained. Weight minimization is performed by two different methods: the constrained gradient travel method and the optimality criterion method. | ||
| Keywords | ||
| Optimum; Laminated Composite Plate; Dynamic and Static | ||
|
Statistics Article View: 130 PDF Download: 229 |
||
