Naga, S., Gadelrab, R., Bekheet, N., Afifi, A. (1999). Effect of Temperature, Cross-head Speed and Duration of loads on the Mechanical Properties of PVC Polymeric Material.. test, 8(ASAT Conference, 4-6 May 1999), 1-12. doi: 10.21608/asat.1999.24902
S. Naga; R. M. Gadelrab; N. Bekheet; A. Afifi. "Effect of Temperature, Cross-head Speed and Duration of loads on the Mechanical Properties of PVC Polymeric Material.". test, 8, ASAT Conference, 4-6 May 1999, 1999, 1-12. doi: 10.21608/asat.1999.24902
Naga, S., Gadelrab, R., Bekheet, N., Afifi, A. (1999). 'Effect of Temperature, Cross-head Speed and Duration of loads on the Mechanical Properties of PVC Polymeric Material.', test, 8(ASAT Conference, 4-6 May 1999), pp. 1-12. doi: 10.21608/asat.1999.24902
Naga, S., Gadelrab, R., Bekheet, N., Afifi, A. Effect of Temperature, Cross-head Speed and Duration of loads on the Mechanical Properties of PVC Polymeric Material.. test, 1999; 8(ASAT Conference, 4-6 May 1999): 1-12. doi: 10.21608/asat.1999.24902

Effect of Temperature, Cross-head Speed and Duration of loads on the Mechanical Properties of PVC Polymeric Material.

International Conference on Aerospace Sciences and Aviation Technology
Article 25, Volume 8, ASAT Conference, 4-6 May 1999, May 1999, Pages 1-12    PDF (1.71 M)
Document Type: Original Article
DOI: 10.21608/asat.1999.24902
Authors
S. Naga1, 2; R. M. Gadelrab3, 2; N. Bekheet4, 2; A. Afifi5, 2
1Professor, Chairman, Mechanical design Dep. Faculty of Engineering, Mataria, Helwan University.+
2Mechanical Design Department Helwan University, Faculty of Engineering, Mataria, Cairo, Egypt. P. 0. Box 11718.
3Associated professor, Mechanical design Dep. Faculty of Engineering, Mataria, Helwan University+
4Assistant professor, Mechanical design Dep. Faculty of Engineering, Mataria, Helwan University+
5Assistant lecturer, Mechanical design Dep. Faculty of Engineering, Mataria, Hetwan University+
Abstract
An experimental investigation and determination of the mechanical properties is carried out to show the reliability of a PVC in engineering application. For this purpose, the experimental work is divided into two groups, the first group includes a determination of the mechanical properties, such as yield stress, modulus of elasticity and maximum elongation of the initial PVC at normal conditions. The second group includes a study of the factors affecting these properties such as the effect of temperature, cross head speed and load duration by creep.
Keywords
polymer; PVC; Mechanical Properties; creep; Strain rate
Statistics
Article View: 192
PDF Download: 559