SYNTHESIS AND CHARACTERISATION OF CARBOXYMETHYL CELLULOSE- GRAFT- (ACRYLIC ACID-CO-ACRYLAMIDE) AND ITS APPLICATION AS ADSORBENT FOR WASTEWATER TREATMENT | ||
| Journal of Environmental Science | ||
| Article 3, Volume 33, Issue 2, June 2016, Pages 41-67 PDF (840.35 K) | ||
| Document Type: Review Article | ||
| DOI: 10.21608/jes.2016.25489 | ||
| Authors | ||
| Meligil, G. A1; Shaker, M2; Khalil, M. M. H1 | ||
| 1Faculty of Science, Ain Shams University | ||
| 2Holding Company for Water and Wastewater | ||
| Abstract | ||
| In this work , grafting polymerization using gamma radiation from C0-60 source at room temperature (27°C) was employed to produce a novel adsorbent using Acrylamide (AAm), Acrylic acid (AAc) on carboxymethyl cellulose (CMC) for water treatment . The preparation conditions such as effect of Acrylamide (AAm) and Acrylic acid (AAc) concentration and radiation dose on grafting percent were investigated to achieve the optimum grafting percent. The structure, thermal stability and surface morphology were characterized by Fourier transform infrared spectroscopy (FT-IR) & differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively. The results show that for the same radiation dose, the grafting percent is increased with increasing the concentration of acrylamide and acrylic acid (1:1) in solution till 30 % where the best grafting percent obtained. The grafting percent increases with increasing irradiation doses. The grafted Carboxymethyl cellulose (CMC-g-AAm/AAc) was examined and optimized for its application as adsorbent for wastewater treatment. | ||
| Keywords | ||
| Carboxymethyl Cellulose; acrylamide; Acrylic Acid; γ-radiation; Graft polymerization; Wastewater treatment | ||
|
Statistics Article View: 231 PDF Download: 364 |
||
