MATHEMATICAL MODELING OF THE AIR PRESSURE REDUCER OPTIMUM NOZZLE DIAMETER OF ITS TESTING PIPE | ||
| International Conference on Aerospace Sciences and Aviation Technology | ||
| Article 21, Volume 3, ASAT Conference 4-6 April 1989 , CAIRO, April 1989, Pages 383-396 PDF (3.62 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/asat.1989.25944 | ||
| Authors | ||
| A. KHATTAB1; G. RABIE2; O. GAWEISH3; S. ZAHRAN4 | ||
| 1Dr., Assistant Prof., Dept. of mech. power & energy, MfC,CAIRO, EGYPT. | ||
| 2Dr., Associate Prof., Dept. of aircraft, MTC, CAIRO, EGYPT. | ||
| 3Eng., Arab British Dynamics (ABD), System engineering dept,, Cairo, EGYPT. | ||
| 4Dr., Assistant Prof., Mech. Dept. ,Faculty of engineering at SHOBRA, CAIRO, EGYPT. | ||
| Abstract | ||
| One of the most important elements in the pneumatic circuits is the pressure reducer which is commonly used to keep a constant downstream pressure, whatever the value of the upstream one. In fact the downstream pressure would anyway vary, but it could be considered to operate with a sufficient accuracy if its outlet. pressure varies within a zone of ±5% of its nominal value. That is why every pressure reducer, after being manufactured then assembled; must be tested to verify its function, and whether it works in the prescribed tolerance. The testing bench consists of several pressurized air bottles, branches to the pressure reducer, downstream of which there mounted a short pipe of inner diameter: dpipe ; nozzled at its outlet end witha diameter: dn. In the present research, a complete mathematical model is developed to find out the optimum nozzle diameter of the testing section which is necessary to identify the function of certain reducer. | ||
|
Statistics Article View: 164 PDF Download: 207 |
||
