The Effect of Using Steel Fibers on the Performance of Asphalt Mixtures | ||
| ERJ. Engineering Research Journal | ||
| Article 6, Volume 46, Issue 1, January 2023, Pages 55-64 PDF (570.14 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/erjm.2022.154035.1195 | ||
| Authors | ||
| Mohamed F. Abousaba* 1; Saad Elhamrawy2; Ahmed Abu El-Maaty3 | ||
| 1Civil engineering faculty of engineering menofia university | ||
| 2Civil Engineering, faculty of engineering, menufiya University | ||
| 3Civil Engineering department , Faculty of Engineering, Menoufia University | ||
| Abstract | ||
| According to actual experiences with the Egyptian highway system, a significant portion of the roads face long-term wear, creep, and rutting of the asphalt mixtures. The lack of mechanical characteristics in either the binder or the asphalt mixtures, as well as the rising traffic loads, may be to blame for these distresses. In order to avoid earlier damage and failure, this study compares steel fiber-modified hot mix asphalt mixtures with standard mix to examine how well they function. An experimental programme was created and put into place to achieve this goal. Six HMA combinations were tested, including control mixtures, with steel fiber contents of 0.25%, 0.5%, 0.75%, 1%, 1.25%, and 1.5 % by weight to the aggregate of HMA. In this study, the steel fibers were chosen as additive in hot asphalt mixtures for its good tensile strength, durability, ductility, stiffness and flexural properties. In addition, the interface between steel fiber and asphalt concrete has a high bonding strength. Performance of the different hot asphalt mixes was evaluated using the Marshall and ITS tests. The scope of the study included studying the performance of both unmodified and modified mixtures by steel fibers. The results of the investigations indicated that the addition of 1% steel fiber by aggregate weight improved the Marshall stability, flow, Marshall quotient, volumetric properties and the indirect tensile strength. The results also indicated that the addition of steel fiber did not improve the moisture susceptibility for all conditioning periods compared with control mixtures. | ||
| Keywords | ||
| Steel Fiber (SF); Hot Mix Asphalt (HMA); Marshall Stability; Marshall Quotient; indirect tensile strength (ITS) | ||
|
Statistics Article View: 291 PDF Download: 479 |
||
