Developing and Improving the functionality of traffic Police Clothing Fabrics Using Nanotechnology | ||
| International Design Journal | ||
| Article 14, Volume 12, Issue 6 - Serial Number 49, November and December 2022, Pages 177-182 PDF (1.1 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/idj.2022.267236 | ||
| Authors | ||
| Doha Eldemerdash1; Eman Raafat Saad2; Ziad Odah Rebh3 | ||
| 1Faculty of Applied Arts | ||
| 2, Assistant Professor, Apparel Department, Faculty of Applied Arts, Helwan University | ||
| 3Assistant Professor, Design Department, Faculty of fine Arts, Babylon University, . | ||
| Abstract | ||
| The job of the traffic man is one of the hard jobs that require him to stand for long hours in the streets, roads, squares and intersections, so he is exposed to various influences from the surrounding environment such as heat, sunlight and other pollutants. The need for research and development and finding smart solutions for the clothes of the traffic policeman, and several technologies have contributed to the production of new types of advanced fabrics, including (nanotechnology). The research problem was formulated with the following questions: 1. What is the possibility of using textiles processors with nanotechnology to develop and improve the functional performance of traffic police clothing fabrics? 2. The effect of good design on the development and improvement of traffic police uniform? Research importance: 1. Shedding light on modern textile processing methods using nanotechnology to improve the functional properties of traffic police clothing fabrics 2. Contribute to the creation of a traffic police uniform that withstands environmental conditions and improves functionality. 3. It benefits the relevant institutions in the field of clothing and fabric design in general, and functional clothing in particular. Objective : 1. Develop and improve the quality of traffic police uniform fabrics and support additional clothing properties to provide health protection and comfort. 2. Creating and designing an upgraded uniform for the traffic policeman to help him improve his job performance. Methodology: The research followed the descriptive method. Experimental method. The research included the theoretical aspect and discussed topics including: classification of nanoparticles, methods of assembling nanomaterials, Iraqi traffic police uniforms, traffic police clothing fabrics, textile processing. The applied aspect of the research The research followed the experimental approach. First, the fabrics were treated with nanometric suspension solutions of zinc oxide, silver oxide and nanometric titanium oxide by a cure-dry-pad process device. Results : 1. Determining the areas of raw contact with the body before choosing a type of nano-treatment is most effective in improving performance without having to treat all parts of the costume. 2. The correct selection of nanomaterials in the final processing of garment parts fabrics gives accurate and more sustainable results. 3. Traffic Police Fabrics treatments give a set of technical characteristics as a result of their manufacture with functional properties that achieve the ability to respond effectively and high performance characteristics. Recommendations: 1. The method of dividing the pattern parts for functional clothing must be taken into account before proceeding with nanotechnology fabrics treatments. 2. When designing traffic police clothing, a balance between comfort and protection, and the appearance and prestige of the uniform, is taken into account. | ||
| Keywords | ||
| functional performance - Traffic Police; Nanotechnology | ||
|
Supplementary Files
|
||
| References | ||
|
1. Abbas Khammas Al-Saadi. (2022). Fundamentals of Nanomaterials. Baghdad: Dar Al Yamamah - Baghdad. 2. Faisal et al. Al-Shanaq. (2004). textiles. Amman, Jordan: Al-Yazuri Scientific Publishing and Distribution House. 3. Muhammad Abdul Jamal. (2002). Technical scientific foundations in the science of fabric structures. Egypt: Dar es Salaam, Mansoura. 4. Muhammad Gharib Ibrahim. (2011). Nanobiology a new era of pan-life. Cairo, Arab Republic of Egypt: General Book Organization. 5. Salem Saleh Al-Tamimi and Mahmoud Jabari Al-Rubaie. (2012). Fashion between the aspirations of the consumer and the provisions of commercial markets (Al-Rusafi market for ready-made clothes as a model. The Iraqi Journal of Market Research Consumer Protection, p: 28. 6. Suzan Hussein Sanad. (1997). The possibility of improving the physical and aesthetic properties of polyester fabrics and mixing them with cotton by treating them with alkaline solutions. Egypt: Master's thesis at the Faculty of Applied Arts - Helwan University. 7. Traffic Directorate. (2020). Police Service Law and Discipline. Iraq: General Traffic Directorate. 8. A.P.S. Sawhney, B. C. (2008, 8 1). Modern Applications of Nanotechnology in Textiles. Textile Research Journal, pp. 731-739. 9. Adlim, A. (2015). PREPARATIONS AND APPLICATION OF METAL NANOPARTICLES. Indonesia: Department of Chemical Education, FKIP Universitas Syiah Kuala Darussalam Banda Aceh., 10. Azha, S. F. (2018). Cotton Cloth Diversified Application Beyond Fashion and Wearable Cloth. Fashion Technology & Textile Engineering. 11. El-Khatib, E. (2012, 8 1). Antimicrobial and Self-cleaning Textiles using Nanotechnology. Research journal of textile and appare. Research journal of textile and apparel , pp. 156-174. 12. Fei, B. (2015). A study on the application prospect of functional shirt fabrics in the uniform industry. Research,5th International Conference on Advanced Design and Manufacturing Engineerin, (p. 1527 ( . 13. Haque, M. (2019). Nano Fabrics in the 21st century: a review. Asian Journal of Nanoscience and Materials. 14. Hasan, S. (2015). A Review on Nanoparticles: Their Synthesis and Types. 15. Hassan BS1, I. G. (2019). Applications of Nanotechnology in Textiles: A Review. Bangladesh: austin publishing group. 16. Hilgersa, E. b. (1998, October 10). Magnetron-sputtered hard material coatings on thermoplastic polymers for clean room applications. Surface and Coatings Technology, pp. 398-402. 17. Honghong Lyu, B. G. (2017). Ball-Milled Carbon Nanomaterials for Energy and Environmental Applications. USA: ACS Sustainable Chem. Eng ,American Chemical Society. 18. Ibrahim, N. A., Aly, A. A., Eid, B. M., & Fahmy, H. M. (2018, 11 19). Green Approach for Multifunctionalization of Cellulose-Containing Fabrics. pp. 2298-2306. 19. Jeevani, T. (2011). Nanotextiles- A Broader Perspective. Journal of Nanomedicine & Nanotechnology. 20. K, S. (2018, 2 3). Nanotechnology Trends in Fashion and Textile Engineering. Juniper Publishers Inc, pp. 56-59. 21. Kathiervelu, S. S. (2003, no 1). Applications of Nanotechnology in Fibre Finishing. pp. 20-22. 22. M Joshi, A. B. (2009, Sep 29). Nanotechnology – a new route to high-performance functional textiles. Textile Progress, pp. 155-233. 23. Meneghettia, V. A. (2009). Laser ablation synthesis in solution and size manipulation of noble metal nanoparticles. Padova . Italian: Physical Chemistry Chemical Physics. 24. Mirb, M. N. (2008). Synthesis and characterization of metallic copper nanoparticles via thermal decomposition. Islamic Republic of Iran: Elsevier Ltd. 25. Pimpin, A. (2012). Review on Micro- and Nanolithography Techniques and Their Applications. Bangkok , Thailand: Modern Engineering Technology. 26. Saravanakumar, S. A. (2017). A review on the classification, characterisation, synthesis of nanoparticles and their application. Materials Science and Engineering (p. 263 032019). IOP. 27. Stephen Mann, S. L. (1997, 9 11). Sol−Gel Synthesis of Organized Matter. American Chemical Society, pp. 2300–2310. 28. Tree-udom, T. (2011). Fragrant chitosan nanospheres: Controlled release systems with physical and chemical barriers. Elsevier Ltd. Yang, F. Z. (2009). Preparation of Nano-ZnO and Its Application to the Textile on Antistatic Finishing | ||
|
Statistics Article View: 297 PDF Download: 410 |
||
