Shomer, A., Elzoghby, H., Bahgat, M., Sharaf, S. (2022). Fractional Order PID Controller Design for Maximum Power Point Tracking of Dynamic Loaded PV System. test, 3(3), 91-106. doi: 10.21608/ijaebs.2022.164919.1051
Anas O. Shomer; Helmy M Elzoghby; Mohiy E. Bahgat; Soliman M. Sharaf. "Fractional Order PID Controller Design for Maximum Power Point Tracking of Dynamic Loaded PV System". test, 3, 3, 2022, 91-106. doi: 10.21608/ijaebs.2022.164919.1051
Shomer, A., Elzoghby, H., Bahgat, M., Sharaf, S. (2022). 'Fractional Order PID Controller Design for Maximum Power Point Tracking of Dynamic Loaded PV System', test, 3(3), pp. 91-106. doi: 10.21608/ijaebs.2022.164919.1051
Shomer, A., Elzoghby, H., Bahgat, M., Sharaf, S. Fractional Order PID Controller Design for Maximum Power Point Tracking of Dynamic Loaded PV System. test, 2022; 3(3): 91-106. doi: 10.21608/ijaebs.2022.164919.1051

Fractional Order PID Controller Design for Maximum Power Point Tracking of Dynamic Loaded PV System

International Journal of Advanced Engineering and Business Sciences
Volume 3, Issue 3, October 2022, Pages 91-106    PDF (1.21 M)
Document Type: Original Article
DOI: 10.21608/ijaebs.2022.164919.1051
Authors
Anas O. Shomer1; Helmy M Elzoghby2; Mohiy E. Bahgat* 3; Soliman M. Sharaf4
1Department of Electric power and machines, Faculty of Engineering - Helwan, Helwan University, Cairo, Egypt.
2Power Dept. , Faculty of Engineering , Helwan University
3Electrical Power and Machines Department, Faculty of Engineering – Helwan, University of Helwan, Cairo, Egypt
4Department of Electrical Power and Machines, Faculty of Engineering – Helwan, University of Helwan, Cairo, Egypt
Abstract
PV installations and systems running under variable irradiation and temperature, produce a variance in its output voltage, resulting in control challenges. The constant output voltage from such systems despite the variations in the produced voltage and load is maintained by employing a DC converter. This paper presents the design of a maximum power point tracking (MPPT) on DC converter controller for a system. Fractional Order Proportional-Integral-Derivative (FOPID) and Proportional-Integral-Derivative (PID) controllers have been implemented to the system converter as a proposed control approach. Particle Swarm Optimization (PSO) is used as optimization technique for determining the optimal parameters of (FOPID & PID) controllers for tracking the output voltage from trained Adaptive Neuro Fuzzy Inference System (ANFIS) that is corresponding to maximum power generated from (PV) module. The PV system with the dynamic load is modeled and simulated by using the MATLAB/Simulink environment. The system performance is displayed in the form of a family of curves under different operating conditions.
Keywords
PV Stand-alone system; DC-DC boost converter; FOPID controller; PSO optimization; ANFIS
Statistics
Article View: 237
PDF Download: 357