FLUTTER CONSTRAINT FOR AIRCRAFT CONCEPTUAL DESIGN USING RESPONSE SURFACE METHODOLOGY | ||
| International Conference on Aerospace Sciences and Aviation Technology | ||
| Article 19, Volume 11, ASAT Conference, 17-19 May 2005, May 2011, Pages 339-350 PDF (2.56 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/asat.2011.27155 | ||
| Authors | ||
| AHMED A. MOHAMED1; GALAL B. SALEM2; ATEF M. HASSANEIN2 | ||
| 1Research Engineer, Aerospace Research Center, Cairo, Egypt. | ||
| 2Professor, Department of Aerospace Engineering, Cairo University, Giza, Egypt. | ||
| Abstract | ||
| Flutter constraint, applicable to aircraft conceptual design, is constructed using response surface methodology. It is presented by the critical flutter speed, as a function of wing torsion stiffness, root chord, sweep, mass ratio, taper ratio, aspect ratio, center of gravity location and radius of gyration. The constraint function to is a quadratic response surface polynomial. The D-optimal design is used to find the best combinations of design points required to determine the function coefficients. 'The Regier number criterion is used to calculate the critical flutter speed at these design points. Analysis of variance is used to remove the unreliable terms from the function. To match the Regier number criterion, two constraint functions suitable for subsonic aircraft with traditional wing are constructed. The first one is applicable to aircraft with low sweepback wing while the second one is applicable to aircraft with moderate sweepback wing. As a case study, the constraint function is applied within the conceptual design of a subsonic aircraft leading to a considerable weight saving. | ||
| Keywords | ||
| Aircraft Conceptual Design; Flutter and Response Surface Methodology | ||
|
Statistics Article View: 164 PDF Download: 265 |
||
