Synthesis, Characterization, and Adsorption Study of Magnetic Superhydrophobic Monolithic Core-Shell Polystyrene Composite for the Removal of Ethyl Naphthalene from Produced Water Using Fixed Column Bed | ||
| Egyptian Journal of Chemistry | ||
| Volume 66, Issue 13, December 2023, Pages 595-608 PDF (3.98 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ejchem.2023.188348.7486 | ||
| Authors | ||
| R. Hosny* 1; Atef Mohamed Gad Mohamed2; OH Abdelraheem3; Modather F. Hussein4, 5; Mahmoud F. Mubarak* 6; Hanan A. Ahmed* 7 | ||
| 1Production Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt | ||
| 2Assiut and new valley company for water and wastewater fax No: 088229347, Assiut, Egypt | ||
| 3Chemical Engineering Department, Faculty of Engineering, Beni-Suef University, Beni-Suef, Egypt | ||
| 4Chemistry Department, College of Science, Jouf University, P.O. Box 2014, Sakaka, Aljouf, KSA | ||
| 5Chemistry Department, Faculty of Science, Al-Azhar University, Assiut 71524, Egypt | ||
| 6Petroleum Applications Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt | ||
| 7Petrochemicals Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt | ||
| Abstract | ||
| This paper studies the removal of ethyl naphthalene as one of the polyaromatic hydrocarbon pollutants (PAHs) from the produced water. Magnetic super hydrophobic monolithic core-shell polystyrene (MSHMCSh@PS) was prepared using a simple and low-cost (facile in situ bulk radical polymerization) method, in the presence of 2-azobisisobutyronitrile as an initiator for ethyl naphthalene adsorption. The characterization of the MSHMCSh@PS was performed using FT-IR, TGA, SEM, TEM, and VSM. The possibility of PAHs adsorption from produced water was performed using the continuous adsorption study in a fixed-bed column. The effects of flow rate, concentration, and bed height were investigated. The results showed that the relationship between adsorption capacity with both inlet concentration and bed depth is a direct one, while the relationship between adsorption capacity and flow rate is an inverse relationship. The best column parameters were found at 2.5 ml/min flowing rate, 9 cm bed height, and 50 mg/L concentration. The experimental column results and the relationship between operating boundaries were analyzed according to Yoon-Nelson and Thomas models. The results indicated that the breakthrough curve follows the Yoon-Nelson model. The practical application results showed that the PAHs were adsorbed from the produced water using the prepared absorbent MSHMCSh@PS, which was distinguished by its superior ability. | ||
| Keywords | ||
| Synthesis and characterization; PAHs; Produced water treatment; Polystyrene; Magnetite; Adsorption | ||
|
Statistics Article View: 591 PDF Download: 301 |
||
