Corrosion Inhibition of Hybrid Ti/Ce Salt for Zinc in HCl Solution | ||
| Egyptian Journal of Chemistry | ||
| Volume 66, Issue 13, December 2023, Pages 1069-1079 PDF (1.75 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ejchem.2023.202393.7785 | ||
| Authors | ||
| Aliaa Abdelfatah1; Lamiaa Z. Mohamed* 1; Ghalia A. Gaber2 | ||
| 1Mining, Petroleum, and Metallurgical Engineering Department, Faculty of Engineering, Cairo University, 12613, Giza, Egypt | ||
| 2Department of Chemistry, Faculty of Science (Girls), Al-Azhar University, P.O. Box: 11754, Yousef Abbas Str., Nasr City, Cairo, Egypt | ||
| Abstract | ||
| The inhibition of zinc of hybrid Ti/Ce salt with 0, 100, 300, 600, 900, 1200, and 1600 ppm concentrations was investigated by weight-loss (WL) estimation and potentiodynamic polarization (PDP) in 1M HCl solution. The inhibition efficiency of hybrid Ti/Ce salt was evaluated as a corrosion inhibitor by immersing the Zn in it over a period extending up to 120 h and the temperature effect (25-55 ⁰C) on inhibition of Zn. WL and the corrosion rate (C_R) were recorded after a short immersing time and 120 h of immersion. A passive layer was formed after 24 h at a high concentration of 1600 ppm hybrid Ti/Ce salt and was stable till 120 h. The surface morphology and composition of the different investigated conditions were studied by SEM and EDX analysis, respectively. | ||
| Keywords | ||
| Zinc; inhibition; Corrosion behavior; HCl; Microstructure | ||
|
Statistics Article View: 288 PDF Download: 154 |
||
