Anber, M., Khalifa, R. (2022). THERMAL PERFORMANCE OF BUILDING ENVELOPE IN RESIDENTIAL BUILDINGS IN NEW ADMINISTRATIVE CAPITAL IN EGYPT. test, 12(6), 21-28. doi: 10.21608/idj.2022.161750.1053
Maha Fawzy Anber; Rania Khalifa. "THERMAL PERFORMANCE OF BUILDING ENVELOPE IN RESIDENTIAL BUILDINGS IN NEW ADMINISTRATIVE CAPITAL IN EGYPT". test, 12, 6, 2022, 21-28. doi: 10.21608/idj.2022.161750.1053
Anber, M., Khalifa, R. (2022). 'THERMAL PERFORMANCE OF BUILDING ENVELOPE IN RESIDENTIAL BUILDINGS IN NEW ADMINISTRATIVE CAPITAL IN EGYPT', test, 12(6), pp. 21-28. doi: 10.21608/idj.2022.161750.1053
Anber, M., Khalifa, R. THERMAL PERFORMANCE OF BUILDING ENVELOPE IN RESIDENTIAL BUILDINGS IN NEW ADMINISTRATIVE CAPITAL IN EGYPT. test, 2022; 12(6): 21-28. doi: 10.21608/idj.2022.161750.1053

THERMAL PERFORMANCE OF BUILDING ENVELOPE IN RESIDENTIAL BUILDINGS IN NEW ADMINISTRATIVE CAPITAL IN EGYPT

International Design Journal
Article 2, Volume 12, Issue 6 - Serial Number 49, November and December 2022, Pages 21-28
Document Type: Original Article
DOI: 10.21608/idj.2022.161750.1053
Authors
Maha Fawzy Anber* 1; Rania Khalifa2
1Higher Institute of Engineering- Shorouk City
2The Higher Institute of Engineering
Abstract
Global warming and environmental challenges are becoming major issues in every aspect of our life and specially in architectural design. The need to follow environmental architecture standards is crucial issue in this time. Egypt has a code for improving the energy efficiency of all building types. However, the residential sector doesn’t fully comply to these standards and measurements. This research explores the compliance of the building envelope of R3 residential complex project in the administrative capital as it represents a prototype that will widely be implemented in different areas across the new administrative capital. The research also studies the potential energy savings resulting from optimizing the building envelope to comply with the Egyptian Code for Improving Energy Efficiency in Buildings. The research analysis and simulation revealed that the building envelope is not compatible with Egyptian Code for Improving Energy Efficiency in Buildings for residential buildings. Following the code for the building envelope elements can achieve annual energy consumption savings that are up to 20%.
Keywords
Building Envelope; Thermal Performance; New Administrative Capital
References
  1. Gamal Eldine, M.; Corvacho, H. (2022) Compliance with Building Energy Code for the Residential Sector in Egyptian Hot-Arid Climate: Potential Impact, Difficulties, and Further Improvements. Sustainability 14, 3936.
  2. Florentine, V.; Caterina, S.; Kurt,W.; Riadh, B. (2013) Energy Efficiency Building Code A Roadmap for Implementation in the MENA Region; UN-CTCN: Copenhagen, Denmark.
  3. Fahmy, M.; Mahdy, M.M.; Nikolopoulou, M. (2013) Prediction of Future Energy Consumption Reduction Using GRC Envelope Optimization for Residential Buildings in Egypt. Energy Build.
  4. CAPMAS (2017). Annual Bulletin of Environment Statistics-Part One: Environment Conditions & Quality; Central Agency for Public Mobilization and Statistics: Cairo, Egypt.
  5. Egyptian Electricity Holding Company (2017), Annual Report, 2016/2017, Ministry of Electricity & Renewable Energy, Egypt.
  6. Ministry of Energy (2018) Egyptian Electricity Holding Company Annual Report 2017/2018; Ministry of Energy: Cairo, Egypt.
  7. Serag, Yehya. (2017). The New Administrative Capital of Egypt a Critical Review from the Regional. SSRN Electronic Journal. 10.2139/ssrn.3162316.
  8. Mohammad Yusoff, W.F.; Mohamed, M.F. (2017) Building Energy Efficiency in Hot and Humid Climate. In Encyclopedia of Sustainable Technologies; Elsevier: Amsterdam, The Netherlands.
  9. Abdulsada, Ghanim & Mohammed Salih, Tawfeeq. (2022). The impact of efficient insulation on thermal performance of building elements in hot arid region. Renewable Energy and Environmental Sustainability. 7. 2. 10.1051/rees/2021050.
  10. M. Al-Homoud (2004), The effectiveness of thermal insulation in different types of buildings in hot climates, J. Therm. Env. Build. Sci. 27, 3
  11. M. Aboulnaga, M. Moustafa (2016), Sustainability of higher educational buildings, Renewable Energy and Environmental Sustainability.1, 28. DOI: 10.1051/rees/2016016
  12. Sharma, S.K.; Mohapatra, S.; Sharma, R.C.; Alturjman, S. Altrjman, C.; Mostarda, L.; Stephan, T. (2022) Retrofitting Existing Buildings to Improve Energy Performance. Sustainability, 14, 666. https:// doi.org/10.3390/su14020666
  13. Khalil, A., Fikry, M., and Abdeaal, W. (2018). High technology or low technology for buildings envelopes in residential buildings in Egypt. Alexandria Engineering Journal, 57(4), 3779-3792. https://doi.org/10.1016/j.aej.2018.11.001.
  14. Shehata, Ahmed & Waheeb, Sahl. (2018). Thermal Performance of Contemporary Residential Buildings in Hot-Arid Climates. Journal of Advanced Research in Dynamical and Control Systems. special. 1295-1303.
  15. Jianen Huang, Shasha Wang, Feihong Teng, Wei Feng (2021) Thermal performance optimization of envelope in the energy-saving renovation of existing residential buildings, Energy and Buildings, Volume 247, 111103, ISSN 0378-7788, https://doi.org/10.1016/j.enbuild.2021.111103.
  16. Shi, L., Zhang, H., Li, Z., Luo, Z., & Liu, J. (2018). Optimizing the thermal performance of building envelopes for energy saving in underground office buildings in various climates of China. Tunnelling and Underground Space Technology, 77, 26 35.
  17. Hoof, Joost & Mazej, Mitja & Hensen, Jan. (2010). Thermal comfort: Research and practice. Frontiers in Bioscience. 15. 765-788. 10.2741/3645.
  18. Mohamed, Edeisy & Cecere, Carlo. (2017). Envelope Retrofit in Hot Arid Climates. Procedia Environmental Sciences. 38. 264-273. 10.1016/j.proenv.2017.03.075.
  19. Osman, M., May (2011), Evaluating and enhancing design for natural ventilation in walk-up public housing blocks in the Egyptian desert climatic design region, Doctorate of Philosophy, Dundee school of architecture, Scotland.
  20. The Egyptian Code for Improving Energy Efficiency in Buildings ECP 306-2005. First part: residential buildings.
  21. Madding, Robert. (2008). Finding R-values of Stud-Frame Constructed Houses with IR Thermography. Inframation 2008. 9. 261-277.
  22. Attia, S., Evrard, A., and Gratia, E. (2012), "Development of benchmark models for the Egyptian residential buildings sector". Applied Energy 94 (2012) 270–284, doi:10.1016/j.apenergy.2012.01.065
  23. Motawa, I., Elsheikh, A., and Diab, E. (2021). Energy Performance Analysis of Building Envelopes. Journal of Engineering, Project, and Production Management, 11(3), 196-206.
  24. 21.  Giama, E. & Kyriaki, Elli & Papadopoulos, Agis. (2020). U-Value: A key role parameter for sustainable buildings. Journal of Sustainable Architecture and Civil Engineering. DOI:  https://doi.org/10.5755/j01.sace.16.3.15442
  25. Chen, F., Wittkopf, S. K., Khai Ng, P., & Du, H. (2012). Solar heat gain coefficient measurement of semi-transparent photovoltaic modules with indoor calorimetric hot box and solar simulator. Energy and Buildings, 53, 74–84. doi:10.1016/j.enbuild.2012.06.00
Statistics
Article View: 219