OPTIMIZING BEHAVIOR OF HIGH STRENGTH CONCRETE CONTAINING DIFFERENT RATIOS OF NANO-SILICA FOR DIFFERENT CEMENT CONTENTS | ||
| The International Conference on Civil and Architecture Engineering | ||
| Article 16, Volume 12, 12th International Conference on Civil and Architecture Engineering, April 2018, Pages 1-11 PDF (1.14 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iccae.2018.30050 | ||
| Authors | ||
| Seleem. S.E. Ahmad1; A. Fawzy1; S. A.S. Tleish2 | ||
| 1Material Engineering Dept., Faculty of Engineering, Zagazig University, Egypt. | ||
| 2Building & construction Dept., Faculty of Engineering, Regdalin ,Sebrata University, Libya. | ||
| Abstract | ||
| ABSTRACT Nano technology application has added the effort to improve its properties by altering the microstructure. Nano materials, by virtue of their very small particle size can affect the concrete properties. The use of amorphous Nano silica at different cement contents 500, 600 and 700 Kg/m3 was studied to improve the compressive strength and tensile strength of high strength concrete. An experimental investigation has been carried out by replacing the cement with Nano silica of 0.5%, 1% and 1.5% by weight of cement at the different cement contents. The experimental test results showed that concrete prepared with 1% Nano silica showed a higher strength than those of the 0.5% and 1.5% Nano silica at the different cement contents and at 28 and 56 days. | ||
|
Statistics Article View: 322 PDF Download: 322 |
||
