Behavior of reinforced self-curing concrete slabs exposed to fire

[1] A. H. Gustaferro, CRSI. Engineering Practice Committee & CRSI. Committee on Fire Ratings,  Reinforced concrete fire resistance, 1st edn, Concrete Reinforcing Steel Institute, Chicago, 1980.

[2] T. Z. Harmathy, Fire safety design and concrete, Longman Scientific & Technical; Wiley, Harlow, Essex, England, New York, NY, 1993.

[3] J. A. Purkiss, Fire safety engineering design of structures, Butterworth-Heinemann, Oxford; Boston, 1996.

[4] A. H. Buchanan, Structural design for fire safety, Wiley, Chichester, England, New York, 2001.

[5] C. Fleischmann, and A. H. Buchanan, “Analytical methods for determining fire resistance of concrete members, in The SFPE Handbook of Fire Protection Engineering,” Third Edition, ed. DiNenno, P. J., National Fire Protection Association, Massachusetts, pp. 4-256, 2002.

[6] C. A. Wade, 'Fire engineering design of reinforced and prestressed concrete elements', in BRANZ Study Report, Building Research Association of New Zealand, no. 33, 1991.

[7] S. EL-Fitiany, and M. Youssef, “Interaction Diagrams for Fire-Exposed Reinforced Concrete Sections, Canadá, Engineering Estructures,” vol. 70, pp. 246-259, 2014.

[8] G. A. Khoury, “Effect of Fire on Concrete and Concrete Structures,” Progress in Structural Engineering and Materials, vol. 2, no. 4, pp. 429-447, 2000.

[9] L. F. Caetano, Estudo do comportamento da aderência em elementos  de concreto armado submetidos à corrosão e elevadas temperaturas, Porto Alegre, Dissertação (Mestrado em Engenharia) - Programa de Pósgraduação em Engenharia Civil, Universidade Federal do Rio Grande do Sul, 153 f, 2008.

[10] M. M. Karim, “Investigation of the Behavior and Properties of Reinforced Concrete Slabs Exposed to Fire Flame,” Master Thesis, Babylon University, Babylon, Iraq, 2005.

[11] P. S. R. Prasad, “Effect of Fire on RC Slab,” International Journal for Innovative Research in Science & Technology, vol. 3, Issue 04, 2016.

[12] G. Ghanem et al., “Behavior of Reinforced Concrete Flat Slab Exposed to Fire Experimentally and Numerically by (ANSYS)”, Journal of Mechanical and Civil Engineering, vol. 13, Issue. 6, pp. 25-42, 2016.

[13] S. M. Allam, H. M.F. Elbakry, and A. G. Rabeai, “Behavior of one-way reinforced concrete slabs subjected to fire,” Alexandria Engineering Journal, vol. 52, pp. 749-761, 2013.

[14] R. Kh. S. Al-Hamd, M. Gillie, S. A. Mohamad, and L. S. Cunningham, “Influence of loading ratio on flat slab connections at elevated temperature: A numerical study,” Frontiers of Structural and Civil Engineering, vol. 14, pp. 664–674, 2020.

[15] H. Sadaghian, and M. Farzam, “Numerical investigation on punching shear of RC slabs exposed to fire,” Computers and Concrete, vol. 23, no. 3, pp. 217-233, 2019.

[16] W. A. Waryosh, and H. H. Hashim, “Behavior of reinforced concrete bubbled slabs exposed to fire flame under static load,” International Journal of Latest Engineering Research and Applications (IJLERA), vol. 4, no. 12, pp. 25-37, 2019.

[17] A. A. Abdul-Razzak, and A. H. Said, “Nonlinear analysis of reinforced concrete slabs at elevated temperature,” Iraqi Journal of Civil Engineering, vol. 9, pp. 42-51, 2010. 

[18] P. J. Moss, R. P. Dhakal, G. Wang, and A. H. Buchanan, “The behaviour of multi-bay two-way reinforced concrete slabs in fire,” Engineering Structures, vol. 30, no. 12, pp. 3566-3573, 2008.

[19] H. Salem, H. Issa, H. Gheith, and A. Farahat, “Punching shear strength of reinforced concrete flat slabs subjected to fire on their tension sides,” Housing and Building National Research Center HBRC Journal, vol. 8, pp. 36-46, 2012. 

[20] C. Sangluaia, M. K. Haridharan, C. Natarajan, and A. Rajaraman, “Behaviour of reinforced concrete slab subjected to fire,” International Journal of Computational Engineering Research, vol. 3, no. 1, pp. 195-206, 2013.

[21] Z. Huang, I. W. Burgess, and R. J. Plank, “Nonlinear Analysis of Reinforced Concrete Slabs Subjected to Fire,” Structural Journal, vol. 96, no. 1, pp. 127-135, 1999.

[22] G. Ghanem, T. Ali, M. Nooman, and M. Kadry, “Behavior of reinforced concrete flat slab exposed to fire experimentally and numerically by (ANSYS) ,” IOSR Journal of Mechanical and Civil Engineering, vol. 13, no. 6, pp. 25-42, 2016.

[23] L. Lim, A. Buchanan, P. Moss, and J. M. Franssen, “Numerical modelling of two-way reinforced concrete slabs in fire,” Engineering Structures, vol. 26, no. 8, pp. 1081-1091, 2004.

[24] G. Wang, “Performance of reinforced concrete flat slabs exposed to fire,” Master thesis, University of Canterbury, Christchurch New Zealand, 2006.

[25] S. Poorna, and R. Prasad, “Effect of fire on RC slab,” International Journal for Innovative Research in Science & Technology, vol. 3, no. 4, pp. 179-183, 2016.

[26] A. Balaji, “Praveen Nagarajan, T.M. Madhavan Pillai, Predicting the response of reinforced concrete slab exposed to fire and validation with IS456 (2000) and Eurocode 2 (2004) provisions,” Alexandria Engineering Journal, vol. 55, no. 3, pp. 2699-2707, 2016.

[27] S. J. George, and Y. Tian, “Structural performance of reinforced concrete flat plate buildings subjected to fire,” International Journal of Concrete Structures and Materials, vol. 6, no. 2, pp. 111–121, 2012.

[28] I. A. Fletcher, S. Welch, J. L. Torero, and R. O. Carvel, “Asif Usmani, The Behaviour of Concrete Structures in Fire,” Thermal Science, vol. 11, no. 2, pp. 37-52, 2007.

[29] A. M. Hassan, “Behavior of Continuous Flat Slab Exposed to Fire,” World Applied Sciences Journal, vol. 23, no. 6, pp. 788-794, 2013.

[30] Kh. A. Abouleiwun, H. M. F. Elbakry, M. A. Diab and S. F. El-Fitiany, “Behavior of RC flat plate structure subjected to compartment fires,” Journal of Structural Fire Engineering, 2022.

[31] J. Ožbolt, D. Ruta, and B. Irhan, “Numerical study of reinforced concrete slabs under extreme loading conditions: Impact and fire,” IOP Conf. Series: Materials Science and Engineering, vol. 615, 2019.

[32] M. M. A. Filho, P. A. G. Piloto, and C. Balsa, “The load-bearing of composite slabs with steel deck under natural fires,”, AIMS Materials Science, vol. 9, no. 1, pp. 150-171, 2022.

[33] L. Choe, S. Ramesh, C. Zhang, and C. Clifton, “Behavior of Composite Floor Assemblies Subject to Fire,” Influence of Slab Reinforcement, vol. 4, 2021.

[34] A. H. Gharbi, and A. S. Mahmoud, “Punching Shear Behavior of Reinforced Concrete Slabs under Fire using Finite Elements,” Journal of Engineering, vol. 26, 2020.

[35] D. M. Manley, “Design of Reinforced Concrete Slabs Exposed to Natural Fires,” University of Canterbury Fire Engineering Conference, Christchurch, New Zealand, April 29, 2014.

[36] A. A. Zende, A. V. Kulkarni, and A. Hutagi, “Behavior of Reinforced Concrete Subjected to High Temperatures-A Review,” Journal of Structural Fire Engineering, vol. 4, 2013.

[37] N. Y. Elwakkad, B. A. Tayeh, Gh. M. Hekal, and Kh. M. Heiza, “Experimental and numerical investigation of the behavior of self-curing R.C. flat slabs,” Case Studies in Construction Materials, vol. 17, 2022, https://doi.org/10.1016/j.cscm.2022.e01457

[38] ECCS 373/1991 Specification for Ordinary Portland Cement Egyptian Standards

[39] Sika fly ash concrete additive, https://egy.sika.com/content/dam/dms/eg01/e/Sika%20Fly%20Ash.pdf

[40] Sika-Viscocrete 3425, Sika Egypt for Construction Chemicals S. A. E. International.

[41] Morgan Chemical Pvt. Ltd Industries Co. in Egypt. https://www.findinegypt.com/c/morgan-chemical-industries-co-263265.

[42] Kh. M. Heiza, N. Farah, N. N. Melaka, and M. A. Tayel, “Experimental study of high strength concrete slabs,” ERJ Journal, vol. 28, no. 1, 2005.

[43] V. V. Cao, H. B. Vo, L. H. Dinh, and D. V. Doan, “Experimental behavior of fire-exposed reinforced concrete slabs without and with FRP retrofitting,” Journal of Building Engineering, Elsevier 51, 2022, https://doi.org/10.1016/j.jobe.2022.104315

[44] F. P. d’Entremont, and G. J. Poitras, “Bending strength of composite slabs exposed to fire at an early age,” Fire Technology, vol. 58, pp. 3509-3527, 2022.

[45] M. A. Ismael, “Flexural behavior of steel fiber-self compact concrete slabs,” Diyala Journal of Engineering Sciences, Second Engineering Scientific Conference, College of Engineering-University of Diyala, ISSN 1999-8716, pp. 83-99, 2015.

[46] O. A. Qasim, and R. Abdulsattar, “Experimental and analytical study of behavior of ultra high self compacted hollow core reinforced concrete one-way slabs,” International Journal of Applied Engineering Research, vol. 13, no. 2, 2018, 1035-1055, ISSN 0973-4562.

[47] N. Y. Elwakkad, and Kh. M. Heiza, Mechanical properties of self-curing concrete (SCUC), Challenge Journal of Concrete Research Letters, vol. 1, 2019, ISSN: 2548-0928 /DOI: https://doi.org/10.20528/ cjcrl.2019.01.001

[48] A. A. Bashandy, “Performance of self-curing concrete at elevated temperatures,” Indian Journal of Engineering & Material Sciences, vol.  22,  pp. 93-104, 2015.

[49] K. K. Sideris, and P. Manita, “Residual mechanical characteristics and spalling resistance of fiber reinforced self-compacting concretes exposed to elevated temperatures,” Construction and Building Materials, vol. 41, pp. 296-302, 2013.

[50] V. Afkhami, E. Dehghani, and M. Arezoumandi, “Effect of exposure to fire on a concrete slab with calcareous aggregate,” Asian Journal of Civil Engineering, 2021. https://doi.org/10.1007/s42107-021-00366-z