shalaby, M., Bahnassawi, H., Baraka, Y. (2023). 3D Finite Elements Analysis of Stress Distribution on the Posterior Tilted Implants on all on 4 Concept. test, 26(3), 283-289. doi: 10.21608/ajdsm.2021.80868.1205
mohamed saad shalaby; Hafez Ibrahim Bahnassawi; Yasser Elghany Baraka. "3D Finite Elements Analysis of Stress Distribution on the Posterior Tilted Implants on all on 4 Concept". test, 26, 3, 2023, 283-289. doi: 10.21608/ajdsm.2021.80868.1205
shalaby, M., Bahnassawi, H., Baraka, Y. (2023). '3D Finite Elements Analysis of Stress Distribution on the Posterior Tilted Implants on all on 4 Concept', test, 26(3), pp. 283-289. doi: 10.21608/ajdsm.2021.80868.1205
shalaby, M., Bahnassawi, H., Baraka, Y. 3D Finite Elements Analysis of Stress Distribution on the Posterior Tilted Implants on all on 4 Concept. test, 2023; 26(3): 283-289. doi: 10.21608/ajdsm.2021.80868.1205

3D Finite Elements Analysis of Stress Distribution on the Posterior Tilted Implants on all on 4 Concept

Al-Azhar Journal of Dental Science
Volume 26, Issue 3, July 2023, Pages 283-289    PDF (532.51 K)
Document Type: Original Article
DOI: 10.21608/ajdsm.2021.80868.1205
Authors
mohamed saad shalaby* 1; Hafez Ibrahim Bahnassawi2; Yasser Elghany Baraka3
1BDS, 2013 G, Faculty of Dentistry, Sinai University
2Removable Prosthodontics department Faculty of Dental Medicine, Boys, Al-Azhar University, Cairo, Egypt
3Removable Prosthodontics department, Faculty of Dentistry, Sinai University, sinai, Egypt
Abstract
Abstract:
Objective: The purpose of this study was to evaluate the stress distribution of fixed implant-supported prostheses using “all-on-four” concept for the treatment of mandibular completely edentulous ridge “in vitro study” by 3D finite elements analysis. Materials and Methods: The finite element model components as the overdenture, mucosa, implants, angled base, abutment, cortical and cancellous bones were created in "Autodesk Inventor, then exported as SAT files. These components were assembled in ANSYS environment. The model was subjected to two loading conditions of 200N, vertically unilateral and, vertically bilateral at molar regions respectively. Results: All values of deformations and stresses appeared on the model components (overdenture, implants, angled base, abutment, cortical and cancellous bones) were within physiological limits under all loads application. Conclusion: Tilted implants at molar area did not affect the system behavior (did not show peak of stresses or deformation) and all values of deformations and stresses that appeared on the model parts (cortical, spongy bone, implant, base, abutment, and overdenture) were within physiological limits under all cases of load application.
Keywords
all-on-four; stress distribution; finite elements; Tilted Implants
Statistics
Article View: 146
PDF Download: 233