Numerical Prediction Of Bending Behavior Of Cold-Formed Steel Channels With Web Openings | ||
| Aswan University Journal of Sciences and Technology | ||
| Volume 3, Issue 1, June 2023, Pages 78-86 PDF (649.42 K) | ||
| Document Type: Original papers | ||
| DOI: 10.21608/aujst.2023.312702 | ||
| Authors | ||
| Mohamed Abdelazim Mohamed Hassan1; Sedky Abdallah Tohamy2; khalid mohamed farah3; Mahmoud Ahmed Saifeldeen4 | ||
| 1Civil engineering, faculty of engineering, Aswan university, Aswan, Egypt | ||
| 2Department of civil Engineering, Minia University, Egypt | ||
| 3Department of civil engineering, Aswan University, Egypt | ||
| 4Civil Engineering Department, Faculty of Engineering, Aswan University, Aswan, Egypt | ||
| Abstract | ||
| Cold-formed steel (CFS) sections are popular in structural and architectural applications because of their lightweight properties and high strength. To reduce floor height, different types of openings are added to the web of CFS beams, facilitating the passage of building services through the beams. This study aims to investigate the effectiveness of circular web openings in CFS beams using numerical simulations with finite element analysis (FEA) software (ABAQUS). Nonlinear three-dimensional finite element models (FEMs) for two CFS lipped channels were created and validated against experimental test results to determine failure mode and ultimate load-vertical displacement relationships. The models were then used to predict the bending behavior of CFS beams with circular web openings by varying the diameter and location of holes. The results showed that the load capacity of the beams decreased slightly when the ratio of hole diameter to web height ( / ) increased up to 0.5. However, there was a more significant decrease in load capacity when ( / ) ranged from 0.5 to 0.7. | ||
| Keywords | ||
| Cold-formed steel; Bending capacity; Local buckling; Finite Element Analyses; Openings | ||
|
Statistics Article View: 148 PDF Download: 177 |
||
