Flexural Performance of Steel Fiber Concrete Beams Reinforced with Hybrid Schemes | ||
| Engineering Research Journal (Shoubra) | ||
| Volume 52, Issue 3, July 2023, Pages 56-64 PDF (1.07 M) | ||
| Document Type: Research articles | ||
| DOI: 10.21608/erjsh.2023.207399.1163 | ||
| Authors | ||
| Tarek S. Mustafa1; Mohamed H. Makhlouf2; Ahmed M. Elbakzawy* 1; Maher A. Adam1 | ||
| 1Civil engineering department, faculty of engineering at Shoubra, Benha university, Cairo, Egypt | ||
| 2Faculty of Engineering, Benha University, Benha, Egypt | ||
| Abstract | ||
| The flexural behavior of concrete beams reinforced with hybrid reinforcing schemes is investigated experimentally in this work. The effects of steel fibers inclusion on the flexural behavior of concrete beams reinforced using hybrid schemes were investigated using four half-scale beams. The steel fibers content (0.00%, 0.50%, and 1.00%) was the most important parameter. The experimental results demonstrated that steel fibers inclusion significantly improved the ultimate load, stiffness, and toughness of concrete beams. Load capacity was enhanced by around 13% and 21% for steel fibers volume ratios of 0.50% and 1.00%, respectively. Toughness improvements were around 97.7% and 161% for steel fibers volume ratios of 0.50% and 1.00%, respectively. A non-linear finite element analysis (NLFEA) was performed to simulate the flexural behavior of RC beams reinforced with hybrid schemes. The load-deflection responses and crack patterns of experimental specimens and numerical models were compared. The comparison showed a good agreement between the experimental and numerical results. The overall average value of the ratio between the experimental flexural capacities to the predicted capacities is about 0.94 and the standard deviation was of 0.028. | ||
| Keywords | ||
| Hybrid schemes; Steel fibers; Finite element; Toughness | ||
|
Statistics Article View: 130 PDF Download: 190 |
||
