The Role of Value Engineering Job Plan in Prioritizing Finishing Flooring Selection Criteria | ||
| JES. Journal of Engineering Sciences | ||
| Article 8, Volume 51, Issue 6, November and December 2023, Pages 522-546 PDF (1.63 M) | ||
| Document Type: Research Paper | ||
| DOI: 10.21608/jesaun.2023.218613.1238 | ||
| Authors | ||
| Shaimaa H Zaki* ; Azza Gamal Hagag | ||
| Architecture Department, Modern Academy for Engineering and Building Technology, Cairo, Egypt | ||
| Abstract | ||
| Recently, finishing flooring requirements have been paid attention to construction projects. In learning spaces, especially drawing halls, finishing floor selection is one of the major challenges. Selecting flooring materials affects the future performance of these spaces. Value engineering is an analytical process that aims to obtain creative alternatives for any project. The research aims to raise the efficiency of the finishing floor material of the largest drawing halls in the Annex Building at the Modern Academy of Engineering and Technology in Maadi, by measuring the value of each alternative considering the value engineering job plan. The proposed approach provides a comprehensive evaluation system based on the functional requirements of floors that are further divided into 26 sub-criteria. The floor finishing material’s functions have been evaluated according to the needs of users using an electronic questionnaire. The analytical Hierarchy Process (AHP) is used as a multi-criteria decision-making technique that helps to measure the relative weight of each function. Then using the life cycle cost technique, the life cycle cost of each finishing floor alternative was calculated. Finally, the extent of achieving these functions by the suggested alternatives was measured related to its life cycle cost in the final steps. The research concluded that Imported HDF is the optimum solution that achieves the highest value. Relying on performance evaluation or evaluation of LCC alone is not a true reflection of the optimal solution during the selection process. This highlights the role of value engineering in getting desired balance. | ||
| Keywords | ||
| Finishing flooring criteria; Value Engineering; Life cycle cost; performance; Value Index | ||
| References | ||
|
[1] R. Sherif, and W. Ismaeel, “Developing Sustainable Guidelines for University Buildings Using Leed”. Sustainable Mega Project Conference, The British University in Egypt. 2016.
[2] J. Jovanovic, “Buildings’ Site Management and Supervision: Cost Analysis of Labor Positions”. International Journal of Engineering Trends and Technology. Vol. 69. No. 5, 242- 248, 2021. DOI: 10.14445/22315381/IJETT-v6915p231
[3] K. Rad, and O. Yamini, “The Methodology of Using Value Engineering in Construction Project Management”. Civil Engineering Journal. 2 (6): 262, 2016. DOI: 10.28991/cej-030986
[4] D. Alwerfalli, B. Czarnik, and A. Ali, “An Overview of Value Engineering in Product Development and Design”. Proceedings of the 2010 Industrial Engineering Research Conference. 2010.
[5] G. Norris. “Integrating Life Cycle Cost Analysis and LCA”. International Journal of Life Cycle Assessment (InLCA). 2001.
[6] O. Abisuga, I. Fomakin, and O. Oshadi, “Educational Building Conditions and the Health of Users”. Construction Economics and Building. 16 (4): 19, 2016. DOI: 10.51301AJCEB.v16i4.4979
[7] S. Schneider, S. Kuliga, C. Holscher, R. Conroy, D., A. Kunert, A. Kulik, and D. Donath. “Educating Architecture Students to Design Buildings from The Inside out: Experiences from a Research Based Design Studio”. 9th International Space Syntax Symposium. 2013.
[8] R. El Messiery, “Recognizing Cost Conciseness of Building Technology Methodologies Through Life Cycle Cost Analysis Technique”. Master Thesis, Architectural Department, Faculty of Engineering, Cairo University, Giza, Egypt. 2017.
[9] M. Al Orabi, and K. Al-Gahtani, “A Framework of Selecting Building Flooring Finishing Materials by Using Building Information Modeling (BIM)”. Advances in Civil Engineering. 2022. DOI: 10.1155/2022/8556714
[10] X. Wu, Z. Kou, P. Oldfield, T. Heath, and K. Borst, “Informal Learning Spaces in Higher Education: Student Preference and Activities”. Buildings. 1 (16): 252. 2021. DOI: 10.3390/buildings11.60252
[11] R. Shimokura , K. Yanagisawa, and S. Sasaki, “The Operation by the Education Providers and Learning Spaces at Independent Schools in Sweden”. Journal of Architecture and Planning (Transactions of AIJ). 81 (728): 2105- 2115. 2016. DOI: 10.3130/aija.81.2105
[12] N. Berman, “A Critical Examination of Informal Learning Spaces”. Higher Education Research and Development. 39 (1): 127- 140. 2020. DOI: 10.1080/07294360.2019.1670147
[13] T. Abdelhamid, “A10- Step Design Process for Architectural Design Studios”. Book: Sustainable Development and Social Responsibility. Vol. 1, 2020. DOI: 10.1007/978-3-030-32922-8_1
[14] M. Jendy, “The relation between the design of the educational spaces of Architectural colleges and their user’s behavioral performance”. Master Thesis, Architectural Department, Faculty of Engineering, Tishreen University, Syrian Arab Republic. 2013.
[15] T. Jebril, and Y. Chen. “The Architectural Strategies of Classrooms for Intellectually Disabled Students in Primary Schools Regarding Space and Environment”. Ain Shams Engineering Journal. 12 (3). 2020. DOI: 10.1016/j.asej.2020.09.005
[16] A. Ouzounis, G. Sidiropoulos, G. Papakostas, I. Sarafis, A. Stamkos, and G. Solakis. “Interpretable Deep Learning for Marble Tiles Sorting”. 2nd International Conference on Deep Learning Theory and Applications. 2021. DOI: 10.5220/0010517000002996
[17] W. Ochen, F. D’ujanga, B. Oruru, and P. Olupot. “Physical and Mechanical Properties of Porcelain Tiles Made from Raw Materials in Uganda”. Results in Materials. 11 (14): 100195. DOI: 10.1016/j.rinma.2021.100195
[18] A. Gumowska, and G. Kowaluk. “Physical and Mechanical Properties of High-Density Fiber Board Bond with Bio-Based Adhesives”. Forests. 14(1): 84, 2023. DOI: 10.3390/f14010084
[19] P. Lertloypanyachai, and S. Thongsang. “Improving the Mechanical Properties of Rubber Floor Tiles by Rock Powder Particle as Filler in Natural Rubber”. Materials Today: Proceedings. S (7): 14907- 14911. 2018. DOI: 10.1016/j.matpr.2018.04.028
[20] T. Ateya, B. Balci, O. Bayraktar, and G. Kaplan. “Floor Coating Materials”. 5th international Congress an Engineering, Architecture and Design. 2019.
[21] M. Baker. “The Application of Marble and Granite as Building Materials in Jordan”. Jordan Journal of Civil Engineering. 11(2): 234- 238, 2017.
[22] B. Altay, and E. Salci, “Exploring Designers’ Finishing Materials Selection for Residential Interior Spaces”. Architectural Engineering and Design Management. 2023. DOI: 10.1080/17452007.2023.2181753
[23] F. Labuan, and M. Waty, “Study of Selecting Floor Cover by Using the Value Engineering Method in Housing Project”. IOP Conference Series Materials Science and Engineering. 1007(1): 012076, 2020. DOI: 10.1088/1757-899x/1007/1/012076
[24] R. Nemeth, P. Posch, S. Molnar, and M. Bak, “Performance Evaluation of Strip Parquet Flooring Panels After Long-Term, in-Service Exposure”. Drewno. 57(193): 119- 134, 2014. DOI: 10.12841/wood.1644-3985.091.08
[25] K. Ilayaraja, and M. Egyaabal, “Value Engineering in Construction”. Indian Journal of Science and Technology. 8(32), 2015. DOI: 10.17485/ijst/2015/v8i32/87285
[26] B. Ramani, and J. Kumarpitroda, “A Study on Application of Value Engineering in Housing Project”. International Journal of Technical Innovation in Modern Engineering & Science [IJTIMES]. Vol. 4, No. 5, 2018.
[27] S. Amit, and H. Srivastava, “A Case Study Analysis Through the Implementation of Value Engineering”. International Journal of Engineering Science and Technology. 2011.
[28] M. Lakousha, “Value Engineering: Applying its Theories on the Life Cycle of Office Buildings in the New Cities of Egypt”. Master Thesis, Architectural Department, Faculty of Engineering, Cairo University, Giza, Egypt. 2016.
[29] M. Abdel-Raheem, V. Bubach, A. Abdel-Hameed, G. Sanchez, and L. Navarro, “Value Engineering and its Applications in Civil Engineering”. Construction Research Congress Conference. 2018. DOI: 10.1061/9780784481295.027
[30] L. M. Khodeir, and A. El Ghandour, “Examining the Role of Value Management in Controlling Cost Overrun [Application on Residential Construction Projects in Egypt]”. Ain Shams Engineering Journal. 10(2019), 471- 479. DOI: 10.1016/j.asej.2018.1.1.008
[31] D. J. Scheicher, H. M. Baumann, D. W. Sullivan, and J. Yim, “Integrative Conceptual Review: Evaluating the Effectiveness of Performance Management: A30- Year Integrative Conceptual Review”. Journal of Applied Psychology. Vol. 104, No. 7, 851- 887, 2019. DOI: 10.1037/ap10000368
[32] D. Anicic, and J. Anicic, “Cost Management Concept and Project Evaluation Methods”. Journal of Process Management- New Technologies, International. Vol. 7, No. 2, 2019. DOI: 10.5937/jouproman7-21143
[33] M. Mas-Machuca, A. Akhmedova, and F. Marimon, “Quality Management: A Compulsory Requirement to Achieve Effectiveness”. Total Quality Management & Business Excellence. 32(13): 1- 20. 2018. DOI: 10.1080/14783363.2018.1548275
[34] M. Annamalai, and C. Ganapathy, “Value Management in Construction Projects”. International Journal of Current Engineering and Science Research (IJCESR). Vol. 8, Issue 3, 2021.
[35] K. B. O. Amoah, “Optimizing Building Information Modeling and Value Engineering Synergy for Construction Schedule and Cost Worth”. Journal of Civil Engineering Research. 13(1): 12- 23, 2023. DOI: 10.5923/J.JCE.20231301.02
[36] F. J. Bromilow, and M. R. Pawsey, “Life Cycle Cost of University Buildings”. Construction Management and Economic. 5(4): S3- S22, 2013. DOI: 10.1080/01446193.1987.10462089
[37] R. Heralova, “Life Cycle Costing as an Important Construction to Feasibility Study in Construction Projects”. Procedia Engineering, 196: 565- 570, 2017. DOI: 10.1016/j.proeng.2017.08.031
[38] N. N. Kale, D., and R. Menon, “Life Cycle Cost Analysis of Commercial Buildings with Energy Efficient Approach”. Prespective in Science, 8 (c), 2016. DOI: 10.1016/j.pisc.2016.04.102
[39] A. Reina, A. Kocsis, A. Merlo, I. Nemeth, and F. Aggogeri, “Maintenance Decision Support for Manufacturing System Based on the Minimization of the Life Cycle Cost”. 49th CIRP Conference on Manufacturing Systems, (CIRP- CMS 2016), 674- 679. DOI: 10.1016/j.procir.2016.1.117
[40] S. Pazarceviren, and B. Dede, “Life Cycle Costing Model Based on Target Costing and Activity-Based Costing Method and a Model Proposal”. European Scientific Journal. 2015.
[41] Saaty T. L., and Vargas L. G., “Models, Methods, Concepts and Applications of the Analytic Hierarchy Process”. International Series in Operations Research & Management Science. Vol. 175. USA: Springer. 2012.
[42] https://data.worldbank.org/indicators/FP.CPI.TOTL.ZG?locations=EG – Accessed in 14-5-2023 at 22.00 O’clock.
[43] F. J. V., “Systems Life Cycle Costing Economic Analysis, Estimation, and Management”. Boca Raton, CRC Press. 2011.
[44] J. Kneifel, and D. Webb, “Life Cycle Costing Manual for Federal Energy Management Program”. NIST Handbook 135. 2020 Edition.
[45] B. Ellis, “Life Cycle Cost”. The Jethro Projects. 2007.
[46] S. Atabay, and N. Galipogullari, “Application of Value Engineering in Construction Projects”. Journal of Traffic and Transportation Engineering. Vol. 1, No. 1, PP. 39- 48,2013. DOI: 10.17265/2328-2142/2013.12.005 | ||
|
Statistics Article View: 418 PDF Download: 959 |
||
