Zahra, N. (2023). Role of artificial intelligence technology in the development of furniture design Process. test, 13(6), 503-520. doi: 10.21608/idj.2023.320147
Nehal Zahra. "Role of artificial intelligence technology in the development of furniture design Process". test, 13, 6, 2023, 503-520. doi: 10.21608/idj.2023.320147
Zahra, N. (2023). 'Role of artificial intelligence technology in the development of furniture design Process', test, 13(6), pp. 503-520. doi: 10.21608/idj.2023.320147
Zahra, N. Role of artificial intelligence technology in the development of furniture design Process. test, 2023; 13(6): 503-520. doi: 10.21608/idj.2023.320147

Role of artificial intelligence technology in the development of furniture design Process

International Design Journal
Article 33, Volume 13, Issue 6, November and December 2023, Pages 503-520    PDF (979.24 K)
Document Type: Original Article
DOI: 10.21608/idj.2023.320147
Author
Nehal Zahra
Interior Design and furniture Department, Faculty of Applied Arts, Damietta University nehalnabil@du.edu.eg
Abstract
Artificial intelligence (AI) empowers innovative applications in furniture that are presented in generative models. In recent times, there are many implementations of machine-learning approaches to develop the furniture design process. Due to contemporary individuals' requirements, rapid fluctuations in customers' preferences, and the geometrics complexity of designs, furniture designers need to explore multiple alternative solutions during the design process. This study aims to clarify the current AI technologies implemented in furniture design to develop the design process and boost furniture designers’ abilities and performances in their work. Therefore, this study presents two models: the first one is for the design process to differentiate between the design conducted by humans and the design implemented by AI. The second model clarifies the role of the furniture designer inside AI systems for the design process. Based on the review study, the author presents a SWOT analysis of the strengths, weaknesses (limitations), opportunities, and threats of using AI to design furniture. A survey was conducted to measure furniture designers’ responses to the SWOT analysis. The findings of this paper have enclosed that, (89.4%) of furniture designers view AI performs better in generating initial ideas than other design tasks. (87.2%) view AI is not sufficient without the involvement of designers. (72.3%) view AI is a professional design tool that will enhance interactive design and virtual design. (78.7%) of them are afraid of losing designers’ identities due to using the same AI techniques.
.Problem: The research problem is limited to the following questions:

How can the current AI technologies implemented in furniture design develop the design process?
 What is the role of the furniture designer inside AI systems?
 What do furniture designers think about the changes that occurred in the furniture design process after using AI techniques?

 
Hypoth Keywords: Artificial Intelligence(AI), Furniture Design, Generative Design, Machine Learning, SWOT analysis eses:
From the previous questions, the researcher assumes the following:
The using of AI technology in furniture design affects the development of the design process, and designers’ roles and skills.
 
Objectives: This study aims to:

Study the AI techniques implemented in the furniture design process.
Study the machine learning approaches applied in the furniture design process.
Define the role of the furniture designer inside AI systems for the design process.
Measure and analyze the effect of applying AI technology on the furniture design process and the furniture designers’ roles and skills.
Keywords
Intelligence(AI); Furniture Design; Generative Design; Machine Learning; SWOT analysis
Supplementary Files
References
  1. Khan M, Hayat H, Awan I, Hybrid case‑base maintenance approach for modeling large scale case‑based reasoning systems, Human-centric Computing and Information Sciences, 2019, pp. 1-25.
  2. Long G, Lin B, Cai H, Nong G, Developing an Artificial Intelligence (AI) Management System to Improve Product Quality and Production Efficiency in Furniture Manufacture, Procedia Computer Science 166,  2020, pp. 486–490.
  3. Schmitt P, Weiß S ,The Chair Project: A Case-Study for using Generative Machine Learning as Automatism, 32nd Conference on Neural Information Processing Systems (NIPS 2018), Montréal, Canada [s.n.], 2018.
  4. AI-Kang Li, A whole-grammar implementation of shape grammars for designers, Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, 2018, pp. 1-8.
  5. Anantrasirichai N, Bull D, Artificial intelligence in the creative industries: a review, Artificial Intelligence Review,2022, pp 589–656.
  6. Andreolli M, Corradetti D, Cremonini C, NegroF, Piazza M, Zanuttini R, Italian standard UNI 9151-a new approach to the design of industrial wood packaging, Drvna Industrija, vol. 68, no. 3, 2017, pp. 267–273.
  7. Arroyo D, Postels J, Tombari F., Variational Transformer Networks for Layout Generation, CVF Conference on Computer Vision and Pattern Recognition (CVPR). , Nashville, TN, USA: IEEE, 2021, pp. 13642-13652.
  8. Barros M, Duarte J, Chaparro B, Integrated generative design tools for the mass customization of furniture, Design Computing and Cognition, 2014, pp. 285-300.
  9. Buonamici F,Carfagni M, Furferi R,Volpe Y, Governi L, Generative Design: An Explorative Study ,Computer-Aided Design and Applications, Vol. 18, No 1 , 2021, p. p145.
  10. Dalal S, Athavale V, Jindal K, Designing Case-based reasoning applications with Colibri Studio, International Journal of Research in Computer Engineering and Electronics. - [s.l.] : IJRCEE, 2012, pp. 1-5.
  11. F Zhang, Design and Implementation of Industrial Design and Transformation System Based on Artificial Intelligence Technology, Hindawi Mathematical Problems in Engineering, 2022, pp. 1-9.
  12. Feringa J, Notes on the Potential of Simulation for Architectural Conception, the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA). - [s.l.] : ACADIA; First Addition, 2008, pp265:267.
  13. Figoli F, Mattioli F, Rampino L, Artificial intelligence in the design process, Milano, Italy: FrancoAngeli, 2022, pp. 1-105.  ISBN 9788835134640.
  14. Fu Q, Fu H, Yan H, Zhou B, Chen X, Li X, Human-centric metrics for indoor scene assessment and synthesis, Graphical Models, 2020.
  15. Goodfellow I, Pouget-Abadiey J, Mirza M, Xu B, Warde-Farley D, Ozairz S, Courville A, Bengiox Y, Generative Adversarial Nets, Advances in neural information processing systems, 2014, pp. 2672-2680.
  16. Gurel E, Tat M, SWOT Analysis: A Theoretical Review, The Journal of International Social Research,2017, pp. 994-1006.
  17. Haenlein M, Kaplan A, A Brief History of Artificial Intelligence: On the Past, Present, and Future of Artificial, CALIFORNIA MANAGEMENT REVIEW, California: sage, Vol. 61, No. 4, 2019, pp. 5-14.
  18. Hayrettin M, Generative Design for Bookshelf and TV Unit Design, USA: Iksad publishing house, 2012, pp. 1-182.
  19. Irbite A, Strode A, Artificial Intelligence VS Designer: The Impact of Artificial Intelligence on Design Practice, International Scientific Conference, 2021, pp. 539-549.
  20. Janjanam D, Ganesh B, Manjunatha L, Design of expert system architecture: An overview, Journal of Physics: Conference Series 1767 012036,2021, pp. 1-7.
  21. Kan P, Kaufmann H, Automated Interior Design Using a Genetic Algorithm, VRST2017 23rd ACM Symposium on Virtual Reality Software and Technology, Gothenburg, Sweden : [s.n.], 2017, pp. p1-2.
  22. Kim J, Lee J, Stochastic Detection of Interior Design Styles Using a Deep-Learning Model for Reference Images, Appl. Sciences,2022, pp. 1-20.
  23. Li H, Lachmayer R, Generative Design Approach for Modeling Creative Designs, IOP Conference Series: Materials Science and Engineering 408 012035. - [s.l.]: IOP Publishing, 2018.
  24. Li Y, Wang X, Wu Z, Li G, Liu S, Zhou M, Flexible indoor scene synthesis based on multi-object particle swarm intelligence optimization and user intentions with a 3D gesture, Computers & Graphics, Vol. 93, 2020, pp. 1-12.
  25. M Khan, Applications of case-based reasoning in Software Engineering: a systematic mapping study, IET Software. - [s.l.]: The Institution of Engineering and Technology, Vol. 8, No.6, 2014, pp. 258–268.
  26. Mehmet R. Tolun, Sahin S, Oztoprak K, Expert systems ,In Kirk-Othmer Encyclopedia of Chemical Technology / book auth. Mehmet R. Tolun Seda Sahin, Kasim Oztoprak, USA : JohnWiley & Sons, Inc., 2016.
  27. Miao Y, Qingnan F, Yujie W, Yueqi D, Baoquan C, Graph Neural Network for Generative Furniture Arrangement, Journal of Computer-Aided Design & Computer Graphics, Vol. 33, No.3,2021, pp. 457-464.
  28. Pena M, Carballal A, Rodríguez-Fernández N, Santos I, Romero J, Artificial intelligence applied to conceptual design. A review of its use in architecture, Automation in Construction, Vol. 124, 2021, pp. 1-30.
  29. Pollák M, Török J, Use of Generative Design Tools in the Production of Design Products using 3D Printing Technology,TEM Journal. - [s.l.] : UIKTEN, Vol. 11, No.1,  2022, pp. 249-255.
  30. Radakovic D, Bridging Nature-Art-Engineering with Generative Design, the International Conference of Experimental and Numerical Investigations and New Technologies, Zlatibor Mountain, Serbia: Springer Nature, Vol. 153, 2020, pp 329.
  31. Radford A, Metz L, Chintala S, Unsupervised Representation Learning with Deep Convolutional Generative Adversarial Networks, ICLR, 2016, p. 1-16.
  32. Samoili S, Lopez M, Gomez E, De G, Martinez-Plumed F, Delipetrev B, AI Watch Defining Artificial Intelligence.Towards an operational definition and taxonomy of artificial intelligence, Luxembourg: Publications Office of the European Union, 2020, pp. 1-90.
  33. Schmidt E, Work R, Catz S, Horvitz E, Chien S, Jassy A, Clyburn M, Louie G, Darby C, Mark W, Ford K, Matheny J, Griffiths J, McFarland K, Moore A, National Security Commission on Artificial Intelligence, USA : [s.n.], 2021, p. p21.
  34. Sydora C, Stroulia E, Rule-based compliance checking and generative design for building interiors using BIM, Automation in Construction, Vol. 120, 2020, pp. 1-23.
  35. Uusitalo S, Kantosalo A, Salovaara A, Takala T, Guckelsberger C, Co-creative Product Design with Interactive Evolutionary Algorithms: A Practice-Based Reflection,11th International Conference, EvoMUSART 2022, Madrid, Spain: Springer Nature Switzerland, 2022, pp. 292–307.
  36. V Yönder, A Case Study on Generative Building Skin Forming by Employing Building Information Modelling (BIM) Tools, International Journal of Architecture and Planning, Vol. 8.,2020,  p. p2.
  37. Verganti R, Vendraminelli L, Iansiti M, Design in the Age of Artificial Intelligence, Working Paper 20-091. Harward Business School,2020, pp. 1-36.
  38. Walia K, Khan A, Breedon P, The Generative Design Process for Robotic Design Applications, Journal of Additive Manufacturing Technologies, 2021.
  39. Wu J, Zhang C, Xue T, Freeman W, Tenenbaum J, Learning a Probabilistic Latent Space of Object Shapes via 3D Generative-Adversarial Modeling, 29th Conference on Neural Information Processing Systems. - Barcelona, Spain. : [s.n.], 2016, pp. 1-11.
  40. Yang B, Li L, Song C, Jiang Z, Ling Y, Automatic interior layout with user-specified furniture, Computers & Graphics, Vol. 94. , 2021, pp. 1-8.
  41. Zhang S, Xie W, Zhang S, Geometry-Based Layout Generation with Hyper-Relations AMONG Objects, Graphical Models, Vol. 116,2021, pp.101-104.
  42. Zheng H, Ren Y, Machine Learning Neural Networks Construction and Analysis in Vectorized Design Drawings, 25th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA). - Hong Kong: Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Vol. 2., 2020, pp. 707-716.
 

 

Statistics
Article View: 929
PDF Download: 1,056