Impact of Various Lining Materials on Fracture Resistance of CAD/CAM Fabricated Ceramic Onlays Subjected to Thermo-mechanical Cyclic Loading | ||
| Egyptian Dental Journal | ||
| Volume 69, Issue 4 - Serial Number 5, October 2023, Pages 3119-3130 PDF (317.34 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/edj.2023.219757.2618 | ||
| Authors | ||
| Mohamed Abd-Almohaimen1; Ali Atef* 2; Ashraf Ibrahim Ali3; Salah Mahmoud4 | ||
| 1Post graduate student, Operative Dentistry Dept, Faculty of Dentistry, Mansoura University, Egypt | ||
| 2Lecturer, Operative Dentistry Dept, Faculty of Dentistry, Mansoura University, Egypt | ||
| 3Clinical Associate Professor, Operative Dentistry Dept, Faculty of Dentistry, Mansoura University, Egypt | ||
| 4Clinical Professor of Operative Dentistry Dept, Faculty of Dentistry, Mansoura University, Egypt | ||
| Abstract | ||
| Objectives: This study evaluated the impact of various lining materials on the fracture resistance of CAD/CAM ceramic onlays subjected to thermo-mechanical cyclic loading. Materials and methods: Forty-eight teeth were randomly assigned to four main groups of twelve specimens each according to the lining material used (n=12): group 1, control group with no lining material; group 2, Biodentin; group 3, Cention Forte and group 4, resin modified glass ionomer (Fuji II LC). Then, each group was separated into two subgroups (n=6), one of which was tested immediately and the other after thermo-mechanical cyclic loading. Standardized IPS e.max ZirCAD ceramic onlays were fabricated with CAD/CAM and bonded on all specimens. The fracture resistance of each group was measured using a universal testing machine. Data were statistically analyzed using the Shapiro-Wilk, one-way ANOVA, student’s t-test and post-hoc tukey tests. Results: One-way ANOVA revealed statistically non-significant differences among experimental groups (p<0.05) except for a significant difference between both Biodentin, Fuji II groups and the control group after thermo-mechanical cyclic loading (p= 0.001). Moreover, post-hoc tukey test revealed a significant difference between Fuji II group without cyclic loading and Fuji II group after thermo-mechanical cyclic loading (p < 0.05). Conclusions: Within the parameters of this study, the various types of lining materials had significant difference in fracture resistance, as Fuji II showed the most favorable outcome, however, it showed a significant deterioration upon thermo-mechanical cyclic loading. Clinical relevance: Ceramic onlays with various lining materials may be a viable approach for the restoration of molars. | ||
| Keywords | ||
| CAD/CAM; lining; Ceramic; Onlays; Cyclic loading | ||
|
Statistics Article View: 261 PDF Download: 262 |
||
