Computational Techniques for Calculation of Missile Aerodynamic Coefficients | ||
| The International Conference on Electrical Engineering | ||
| Article 83, Volume 7, 7th International Conference on Electrical Engineering ICEENG 2010, May 2010, Pages 1-21 PDF (926.83 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iceeng.2010.33250 | ||
| Authors | ||
| Mandour, M. F.1; Mahmoud, O. K1; Abdalla, H. M2 | ||
| 1Egyptian Armed Forces. | ||
| 2Military Technical Collage. | ||
| Abstract | ||
| Abstract: Studying the flow over bodies of revolution is crucial to the design of missiles and obtaining the correct shape which has a large impact on the performance of the missile. Three-dimensional flow simulation over a body of revolution were carried out in order to obtain flow field parameters for different angles of attack namely -4.09, -2.04, 2.06, 4.11, 6.17 and 12.41˚ at Mach number of 0.5 (subsonic) and of -4.34, -2.15, 2.17, 4.37, 8.87, and 13.6˚ at Mach number of 1.2 ( transonic flow conditions). The software FLUENT with its prepressor GAMBIT were used to model a missile of known geometry. The Computational Fluid dynamics results were validated with a prepublished experimental data measured by a wind tunnel [1] The validated model was used to examine Magnus effect on the spinning missile which improves the effect of the high spinning rate on the side force affecting the missile body. | ||
| Keywords | ||
| CFD; Aerodynamic; Magnus effect | ||
|
Statistics Article View: 120 PDF Download: 494 |
||
