The impact of different temperatures on Nano Silver Carbon manufacturing by Arc Discharge method | ||
| Alfarama Journal of Basic & Applied Sciences | ||
| Volume 5, Issue 3, July 2024, Pages 409-416 PDF (1.21 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ajbas.2024.251945.1199 | ||
| Authors | ||
| Menna Ali Gharieb* 1; Alaa Khalil2; shokry abdelaty3; Ahmed elkhatib4 | ||
| 1Department of Physics,faculty of science,portsaid university | ||
| 2Basic Sciences Department, Faculty of Engineering, Pharos University in Alexandria | ||
| 3Physics Department, Faculty of Science, Port Said University, Port Said, Egypt | ||
| 4Physics Department, Faculty of Science, Alexandria University, Alexandria, Egypt. | ||
| Abstract | ||
| The arc discharge process was adjusted by varying the temperature by two values The temperature, applied voltage, electrode shape, and kind of dielectric medium all have a significant impact on the mass production, stability, yield, and size and form. AgNPs-CNT with an average particle size of 13 nm was produced by the system (A) at a temperature of -10° C, but in system (B) the temperature was about 55° C and the production was spherical AgNPs/C with an average particle size of 30 nm. In both systems, the two electrodes were 99.9% pure silver as the anode with a diameter of 0.5 cm and 10 cm of length and carbon as the cathode with a diameter of 0.2 cm and 4 cm of length, the applied voltage was 30 A and the dielectric medium was ethanol. 1Energy-dispersive X-ray spectroscopy (EDX), Transmission Electron Microscope (TEM), and ultraviolet-visible spectrophotometer (UV-Vis) were used to characterize the yields. Every characterization demonstrates that the production of nanoparticles for both systems was successful. | ||
| Keywords | ||
| arc discharge in ethanol; Carbon Nanotubes; and Nano-silver | ||
|
Statistics Article View: 180 PDF Download: 81 |
||
