The usage of Modelling and polymers in industrial design | ||
| Journal of Textiles, Coloration and Polymer Science | ||
| Volume 22, Issue 1, 2025, Pages 267-279 PDF (1.03 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jtcps.2024.259214.1293 | ||
| Authors | ||
| Yasmeen A, Elemam1; Reham A. Subaih1; Hager I. Elhefnawy1; Marwa A, Saada1; Shimaa T. Abdelkareem1; Ahmed G. Hassabo* 2 | ||
| 1Benha University, Faculty of Applied Arts, Industrial Design Department, Benha, Egypt | ||
| 2National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||
| Abstract | ||
| Successful product design generally involves a combination of industrial design from models and physical experimentation through prototypes, which frequently diverge more and more as product features are established. The cycle's initial 10% is mostly devoted to conceptual design is an iterative process that calls for tight collaboration between engineers, modelers, and industrial designers. In the state of the art today, when models are roughly recreated from physical prototypes, CAD, or surface models, information is frequently lost. Applications for consumer product design are explored, along with a novel approach to the conceptual design cycle.The cycle's constituent technologies combine to produce an adaptable, iterative design environment. Concepts are created and shared by industrial designers, engineers, and modelers, who switch between digital and physical representations of product geometry. Information is enabled and the physical and digital domains can switch quickly. | ||
| Keywords | ||
| Industrial design; Modelling; Polymers; prototype | ||
|
Statistics Article View: 142 PDF Download: 48 |
||
