Study Properties of Eco-Friendly Lightweight Concrete Made with Crushed Clay Bricks | ||
| JES. Journal of Engineering Sciences | ||
| Article 2, Volume 52, Issue 3, May 2024, Pages 146-158 PDF (550.91 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.21608/jesaun.2024.218298.1237 | ||
| Author | ||
| Shiren Osman Ahmed* | ||
| Delta Higher Institute for Engineering and Technology | ||
| Abstract | ||
| Recycling crushed clay bricks (CCB) in concrete is a sustainable and cost-effective process. Huge quantities of crushed clay bricks waste cause many serious environmental problems around the world. To deal with this problem, crushed bricks were recycled in the concrete industry as an alternative to natural resources, and the brick powder was reused as a partial replacement for cement. The objective of this paper is to study the effect of crushed clay bricks on the characteristics of concrete. 7 concrete mixtures containing coarse crushed brick aggregate (CCBA) and fine crushed brick aggregate (FCBA) were prepared as a complete substitute for sand and dolomite, respectively. Clay brick powder (CBP) and silica fume were used as a partial substitute for cement by 5%, 10%, and 15% of its weight. The water-to-cement ratio was 0.35. For comparison, a control mixture was prepared. Various tests were conducted to evaluate the performance of concrete. The results showed that the workability of the different mixtures containing CCB decreased compared to that of the reference mixture. The compressive strength values of mixtures containing CCBA had a clear decrease compared to the reference mix at 7, 28, and 56 days of curing. The modulus of rupture results had the same path as compressive strength results. The thermal conductivity coefficient for mixtures including CCBA decreased compared to the control mix. Scanning Electron Microscope images indicated crystals of calcium silicate hydrate because of the pozzolanic interaction between the brick powder and the fine crushed clay bricks with calcium hydroxide. | ||
| Keywords | ||
| Thermal conductivity coefficient; Modulus of rupture; Microstructure; Water absorption; ultrasonic pulse velocity | ||
| References | ||
|
[1] M. Adamson, A. Razmjoo, and A. Poursaee,” Durability of Concrete Incorporating Crushed Brick as Coarse Aggregate,” Construction and Building Materials, vol. 94, pp. 426-432, 2015, http://dx.doi.org/10.1016/j.conbuildmat.2015.07.056.
[2] H. Kim a, Y. Lim, M. Tafesse, G.M. Kim, and B. Yang,” Micromechanics-Integrated Machine Learning Approaches to Predict the Mechanical Behaviors of Concrete Containing Crushed Clay Brick Aggregates,” Construction and Building Materials, vol. 317, 2022, https://doi.org/10.1016/j.conbuildmat.2021.125840.
[3] Z.M. Hussein, W. I. Khalil, and H. K. Ahmed,” Impact Strength and Shrinkage of Sustainable Fiber Reinforced Crushed Brick Aggregate Concrete,” Materials Today: Proceedings, vol. 42, pp. 3022-3027, 2021, https://doi.org/10.1016/j.conbuildmat.2021.125840.
[4] J. Zhang, Ch. Li, L. Ding, and J. Li,” Performance Evaluation of Cement Stabilized Recycled Mixture with Recycled Concrete Aggregate and Crushed Brick”, Construction and Building Materials, vol. 296, 2021, https://doi.org/10.1016/j.conbuildmat.2021.123596.
[5] B. Xiong, C. Demartino, J. Xu, A. Simi, G. C. Marano, and Y. Xiao,” High-Strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks,” Construction and Building Materials, vol. 301, 2021, https://doi.org/10.1016/j.conbuildmat.2021.123875.
[6] K. Rodsin,” Confinement Effects of Glass FRP on Circular Concrete Columns Made with Crushed Fired Clay Bricks as Coarse Aggregates,” Case Studies in Construction Materials, vol. 15, 2021, https://doi.org/10.1016/j.cscm.2021.e00609.
[7] M.O. Younis, M. Amin, A. M. Tahwia,” Durability and Mechanical Characteristics of Sustainable Self-Curing Concrete Utilizing Crushed Ceramic and Brick Wastes”, Case Studies in Construction Materials, vol. 17, 2022, https://doi.org/10.1016/j.cscm.2022.e01251.
[8] J. Chena, S.Zhang b, Y. Wang, Y. Geng,” Axial Compressive Behavior of Recycled Concrete Filled Steel Tubular Stub Columns with The Inclusion of Crushed Brick,” Structures, vol. 26, 2020, https://doi.org/10.1016/j.istruc.2020.03.045.
[9] A. M. Tahwia, G. M. Elgendy, and M. Amin,” Durability and Microstructure of Eco-Efficient Ultra-High-Performance Concrete”, Construction and Building Materials, vol. 303, 2021, https://doi.org/10.1016/j.conbuildmat.2021.124491.
[10] Md. J. Islam, and Md. Shahjalal,” Effect of Polypropylene Plastic on Concrete Properties as A Partial Replacement of Stone and Brick Aggregate,” Case Studies in Construction Materials, vol. 15, 2021, https://doi.org/10.1016/j.cscm.2021.e00627.
[11] M. M. Atyia, M. G. Mahdy, and M. Abd Elrahman, “Production and Properties of Lightweight Concrete Incorporating Recycled Waste Crushed Clay Bricks”, Construction and Building Materials, vol. 304, 2021, https://doi.org/10.1016/j.conbuildmat.2021.124655.
[12] B. Rosca,” Comparative Aspects Regarding Concrete of Structural Grade Made with Recycled Brick Aggregate With / Without Fine Particles from Crushing,” Materials Today: Proceedings, vol. 60, pp. 982-987, 2022, https://doi.org/10.1016/j.matpr.2021.12.362.
[13] ASTM C618, 2023 Edition, March 1, 2023 - Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete.
[14] ISO 1920 Concrete Tests-Dimensions, Tolerances, and Applicability of Test Specimens.
[15] ISO 4013 Determination of Flexural Strength of Test Specimens.
[16] A.M. Neville, “Properties of Concrete”, Fifth Edition, Pitman Publishing, London, 2013.
[17] N. M. Ibrahim, Sh. Salehuddin, R. Che Amat, N. L. Rahim, and T. N. T. Izhar,” Performance of Lightweight Foamed Concrete with Waste Clay Brick as Coarse Aggregate”. APCBEE Procedia 5, vol. 5, pp. 497-501, 2013. Doi: 10.1016/j.apcbee.2013.05.084.
[18] BS 1881. Part 114 Methods for determination of density of hardened concrete.
[19] A. A. Bashandy, F. M. Eid, and E. H. Abdou,” Lightweight Concrete Cast Using Recycled Aggregates”, International Journal of Construction Engineering and Management, vol.6, N0.2, pp.35-45, 2017.
[20] I. Asadi, P. Shafigh, Z. F. Bin Abu Hassan, N. Binti Mahyuddin, “Thermal conductivity of concrete–a review”, J. Build. Eng, vol. 20, pp. 81–93, 2018, https://doi.org/10.1016/j.jobe.2018.07.002 | ||
|
Statistics Article View: 327 PDF Download: 503 |
||
