The use of metallic threads in warp and weft to produce women's fabrics executed on Dobby looms | ||
| International Design Journal | ||
| Article 3, Volume 14, Issue 4 - Serial Number 62, July and August 2024, Pages 29-39 PDF (1.75 M) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/idj.2024.280777.1132 | ||
| Authors | ||
| Adel Abdel Moneim AboKhozaim1; Gamal Radwan Abdel Hameed2; esraa maged elaksher* 3 | ||
| 1Assistant Professor of Spinning, Weaving and Knitting Dept., Faculty of Applied Arts, Benha University, adel.abokhozaim@fapa.bu.edu.eg Assist. Prof. Adel Abdel Moneim AboKhozaim | ||
| 2Professor of Design, Textile, Weaving and Knitting Department, College of Applied Arts, Helwan University, Drgamalradwan10@gmail.com | ||
| 3Toukh Administration, Faculty of Applied Arts, Banha University, Egypt | ||
| Abstract | ||
| Women's fabrics are artworks that rely on aesthetic experience throughout the ages. women's fabrics in the Egyptian market lack the compatibility with international fashion, especially in the use of metal threads in the production of these fabrics, as well as the difficulty of operating these threads as warps The research was based on the production of (15) samples on the dobby machine, where three arrangements of metal threads and cotton threads were made in both warp and weft This is done by using five different tissue structures while keeping the count of both warp and weft, the density of the warp in the cm, and the number of picks in cm, Then laboratory tests were conducted on these samples and statistical analysis was carried out. The results of the research benefited him from the possibility of warping metal threads and using them at a rate of up to 12% of the warp and weft threads in designing women’s fabrics without affecting the properties of tensile strength and elongation in the direction of the warp or weft of the fabrics made with the research samples. There was also a non-significant effect on the hardness property of the research samples carried out under the study. Increasing the percentage of metallic threads from 3% to 12% led to an increase in the time of moisture absorption in the research samples under study | ||
| Keywords | ||
| Metallic; threads; dobby; fabric; design | ||
|
Supplementary Files
|
||
| References | ||
|
1- A.DAS, R.Alagirusamy. (2010) technical textile yarns industrial and medical application woodhead publishing series in textiles p 273,274.
2- Baghdadi, Ahmed Abdu Khalil. (2006) Creating an experimental system for computer-aided textile design and implementing it in more than one implementation method – PhD thesis - Faculty of Applied Arts - Helwan University.
3- Gouda, Amani Ahmed Ibrahim. (2007) The effect of different dimensions of textile compositions of women’s clothing on the physiological properties - PhD thesis - Faculty of Home Economics - Menoufia University - p. 52.53
4- Abu Musa, Ihab Fadel. (2002) Fashion design and its scientific and artistic foundations to contribute to building applied computer programs - Dar Al-Hussein Printing.
5- Ali, Hafez Saeed Hafez. (2011) The effect of using metallic threads on the properties of upholstery fabrics - Master’s thesis - Faculty of Applied Arts, Helwan University - p. 54.
6- Ibrahim, Khalil Ibrahim. (2017) Production of embroidered decorative thread from bromine on a ring spinning machine used to produce women’s fabrics - Master’s thesis - Faculty of Applied Arts - Helwan University - pp. 70, 71, 72.
7- Al-Bulaihi, Sahar Muhammad Muhammad. (2014) “Determining the most appropriate physical criteria for evaluating the aesthetic requirements of women’s summer clothing” – PhD thesis - Faculty of Applied Arts, Helwan University - p. 41
8- Mr. Sakina Amin Mahmoud. (2005) Dress style and its relationship to some variables and the physical health of female university students. Master’s thesis - Faculty of Home Economics - Menoufia University.
9- Abdel Maqsoud, Sharif Mahmoud Muhammad. (2021) “Achieving the best mechanical controls for using metal threads on air-jet pressure textile machines” - Master’s thesis - Faculty of Applied Arts - Helwan University, p. 51.
10- Wajih, Mona Ali Ahmed. (2009) The effect of different applied methods for producing yarn on both the functional and aesthetic properties of summer clothing fabrics - PhD thesis - Faculty of Applied Arts - Helwan University - p. 42.
11- Moamen, Najwa Shukri. (2001) Formation on the Mantican (its development - its elements - its foundations - its methods - its contemporary techniques) - first edition - Dar Al-Fikr Al-Arabi.
12- Hassan, Hoda Ibrahim Ismail. (2007) Egyptian architectural decorations in the Greco-Roman era and the extent of their use in enriching the aesthetic artistic values of clothing - Master’s thesis - Faculty of Home Economics - Menoufia University.
13- Jérémie De Baerdemaeker and Jos Vleurinck, Bekaert NV .(2017) An introduction to Metal Fiber Technology ) Bekaert Yannick Lescanne (P.4
14- Sara J. Kadoiph. (2007). tenth edition ، Lowa State university – Pearson –Prentice hall ، New Jercy.
15- J .RUPP, (1999). International Textile Bulletin, Vol. 1 No .9.
16- Kathryn L. Hatch Textile Science. (1992). West Publishing Company. U.S.A.
Mehat, P., V. (1992) an introduction to quality controls from the Apparel industry “. ASQC quality press, U.S.A. | ||
|
Statistics Article View: 177 PDF Download: 190 |
||
