Improving the extraction efficiency of sugar cane mills using perforated rollers with longitudinal channels | ||
| Egyptian Sugar Journal | ||
| Volume 21, Issue 21, December 2023, Pages 72-83 PDF (1.25 M) | ||
| Document Type: Original Research Articles. | ||
| DOI: 10.21608/esugj.2024.255119.1042 | ||
| Authors | ||
| Mohammed Helal* 1; Mahmud Tawfik* 2; Abdel Rahman Abdel Aziz* 2; Ibrahim HassabAllah* 3; Yasser Abdelrhman* 4 | ||
| 1Faculty of Sugar and Integrated Industries Technology, Assiut University, Assiut 71516, Egypt Egyptian Sugar & Integrated Industries Company, EL Hawamdiyah, Giza, Egypt. | ||
| 2Egyptian Sugar & Integrated Industries Company, EL Hawamdiyah, Giza, Egypt | ||
| 3Mechanical Design and Production Engineering Department, Assiut University, Assiut 71516, Egypt | ||
| 4Mechanical Design and Production Engineering Department - Faculty of Engineering, Assiut University, Assiut 71516, Egypt | ||
| Abstract | ||
| Sugarcane mills are considered special equipment for extracting the sugar solution from the sugarcane plant by applying different pressures and forces to the fibers and bagasse as they pass through the mills. The factories of the Egyptian Sugar Company tended to increase the capacity of the mills to reduce the cost of sugar production, which led to the phenomenon of the juice floating, and this led to a loss of juice due to the bagasse reabsorbing it after it left the mills. In this research, we studied increasing the juice drainage area by changing the mill rollers and producing perforated rollers with longitudinal channels to increase the flow of the extracted juice. This was applied to Czech-made Skoda mills located in Deshna sugar factories. Extraction experiments were conducted on Czech mills with a diameter of 300 mm and a length of 400 mm during the 2023 juice season in Deshna sugar factories. Extraction experiments were carried out on 15 samples of both modified and unmodified mills under the same operating conditions, with a difference in the weight of the samples. The results were positive, as the extraction of the modified mills was better than the extraction of the unmodified mills, with a difference reaching 3.23% when the capacity of the mills was increased to 50%. | ||
| Keywords | ||
| Extraction Efficiency; Mills; Perforated rollers; Longitudinal channels | ||
|
Statistics Article View: 138 PDF Download: 159 |
||
