FEASIBILITY OF EXTENDING THE COMPOSITE PROPELLANT POT LIFE | ||
| The International Conference on Chemical and Environmental Engineering | ||
| Article 21, Volume 6, 6th International Conference on Chemical & Environmental Engineering, May 2012, Pages 1-7 PDF (165.25 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iccee.2012.35903 | ||
| Authors | ||
| Nagmeldin M. Amin1; Bahaa Eldien M. Sidig2; M. H. Abuuznien3 | ||
| 1Eng., Department of Chemical Engineering Karary University – Sudan. | ||
| 2Dr. Eng., Department of Chemical Engineering Karary University – Sudan. | ||
| 3Dr. Eng., Associate Professor, Head of Department of Chemical Engineering, Karary University - Sudan. | ||
| Abstract | ||
| Abstract In composite propellant processing, propellant mixing and casting are the most complex and important operations. A solid propellant mixer must be capable of blending a mixture of solid/liquid ingredients with weight ratios as high as 90% solids and 10% liquids and resultant bulk viscosities ranging up to several kilopoise. Propellant mixing and casting processes are affected significantly by the rheological properties of the uncured propellant.1 Sometimes too short potlife is a great problem in propellant manufacturing particulary when the solid content is up to 87%. The often used iron compounds generally even in small amounts also catalyze the curing reaction and shorten the pot life.2 many papers discused the developed methods for improving the composite propellant process by extending its pot life using some affected chemical materials. This work concentrated on a method for improving the manufacturing of the composite propellants dynamically, i.e without adding chemical materials to the propellant formula. This was done by delaying the addition of the curing agent to some hours. During this period a second standared mixing was carrying out. The comparison between the tow kinds of mixing was done to study the effect of the delaying of addition of the curing agent. It was found that viscosity build up test give similar reading for both kinds, which means that the propellant viscocity was not affected by this delaying. It was also found that, the mechanical and performance properties not affected by this step. It confirmed that delaying of the addition of the curing agent in the mixing process can be applied successfully. | ||
| Keywords | ||
| Composite Propellant; propellant curing; Potlife | ||
|
Statistics Article View: 285 PDF Download: 328 |
||
