Ahmed, A., Taha, H., abdelazeem, A., El talawy, D., Tolba, E. (2024). IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.. test, 70(3), 2509-2517. doi: 10.21608/edj.2024.268628.2931
abdullah Ismael Ahmed; Hussein Abdelhady Hussein Taha; Ahmed sholkamy abdelazeem; Dina Bahgat El talawy; Emad Mohamed Tolba. "IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.". test, 70, 3, 2024, 2509-2517. doi: 10.21608/edj.2024.268628.2931
Ahmed, A., Taha, H., abdelazeem, A., El talawy, D., Tolba, E. (2024). 'IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.', test, 70(3), pp. 2509-2517. doi: 10.21608/edj.2024.268628.2931
Ahmed, A., Taha, H., abdelazeem, A., El talawy, D., Tolba, E. IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.. test, 2024; 70(3): 2509-2517. doi: 10.21608/edj.2024.268628.2931

IN-VITRO RETENTION OF HIGH ARCHED MAXILLARY DENTURES CONSTRUCTED FROM CONVENTIONAL, THERMOFORMED, AND MILLED CAD/CAM RESINS.

Egyptian Dental Journal
Volume 70, Issue 3 - Serial Number 4, July 2024, Pages 2509-2517    PDF (1.02 M)
Document Type: Original Article
DOI: 10.21608/edj.2024.268628.2931
Authors
abdullah Ismael Ahmed* 1; Hussein Abdelhady Hussein Taha2; Ahmed sholkamy abdelazeem2; Dina Bahgat El talawy3; Emad Mohamed Tolba4
1B D S, 2015, Faculty of Dentistry, Misr University for Science and Technology, MUST. Teaching assistant, Faculty of Dentistry MUST, Egypt.
2Lecturer of Prosthetic Dentistry, Faculty of Dentistry Minia University, Egypt
3Professor of Prosthetic Dentistry, Faculty of Dentistry, Misr University for Science and Technology, MUST, Egypt.
4Professor of Prosthetic Dentistry, Mina University and Dean, Faculty of Dentistry, Delta University.
Abstract
Purpose: this study was to evaluate the Retention of high-arched maxillary dentures constructed from conventional, thermoformed, and milled CAD/CAM resins.
Materials and Methods: An edentulous patient with high -arched palate was selected from the outpatient clinic, Department of Prosthetic Dentistry, Faculty of Dentistry, Minia University. The patient was seeking complete denture treatment. Using the master cast of this case; thirty stone casts were duplicated, numbered, and randomly allocated to one of three study groups 10 casts each. Thirty denture bases were constructed from the following materials to be as identical as possible 10 of each of the following material: conventional heat cure resin, thermoformed resin, and milling resin by CAD/CAM. The retention of the produced denture bases was tested using a universal testing machine .Results: The thermoformed group displayed the highest numeric retention mean (5.576 N) followed by CAD/CAM (4.888 N) and conventional method (3.232 N). There were statistically significant differences between all groups. Conclusions: within the limitations of this in vitro study, it may be concluded that: The thermoformed resin may be the most suitable material for high arched palate followed by CAD CAM materials. The conventional technique in this case is less recommended.
Keywords
Retention; Denture Base; Conventional; Thermoformed; Milled CAD/CAM Resins
Statistics
Article View: 113
PDF Download: 132