Refaee, A., Ataya, S., Ibrahim, S. (2016). Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties. test, 18(1), 20-26. doi: 10.21608/jpme.2018.37226
Ahmed Refaee; Sabbah Ataya; Samir Ibrahim. "Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties". test, 18, 1, 2016, 20-26. doi: 10.21608/jpme.2018.37226
Refaee, A., Ataya, S., Ibrahim, S. (2016). 'Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties', test, 18(1), pp. 20-26. doi: 10.21608/jpme.2018.37226
Refaee, A., Ataya, S., Ibrahim, S. Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties. test, 2016; 18(1): 20-26. doi: 10.21608/jpme.2018.37226

Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties

Journal of Petroleum and Mining Engineering
Article 3, Volume 18, Issue 1 - Serial Number 97, 2016, Pages 20-26    PDF (846.39 K)
Document Type: Original Article
DOI: 10.21608/jpme.2018.37226
Authors
Ahmed Refaee1; Sabbah Ataya2; Samir Ibrahim3
1Ezz Aldekhela (EZDK) Steel Company, Alexandria, Egypt
2Department of Metallurgy and Materials Engineering, Faculty of Petroleum and Mining Engineering, Suez University, 43721, Suez, Egypt 3 Department of Mechanical Engineering, College of Engineering, Al Imam Mohammad Ibn Saud Islamic University, Riyadh 11432, Saudi Arabia
3Department of Metallurgy and Materials Engineering, Faculty of Petroleum and Mining Engineering, Suez University, 43721, Suez, Egypt
Abstract
The advantages of dual phase steels in structural applications and automobile industries motivate further studies on the effect of processing parameters on the properties of dual phase steel. Production trials of DP steels were performed using a thin slab caster (TSC). Dual phase steel with the composition (in wt. %) of 0.057 C, 0.277 Si, 1.38 Mn, 0.027 Nb, 0.036 P, 0.63 Cr 0.39 Al was produced in sheet thickness of 3.2 mm. The effects of deformation at inter-critical temperatures (790 and 800°C), coiling temperatures (120, 150 and 180°C) and cooling rate (113~136 °C/Sec) on the final microstructure were investigated. Characterization of the dual phase steels mechanical properties was carried out using hardness, quasi-static tensile test, high strain rate tensile tests, and impact tests. The final mechanical properties were correlated with the different microstructure constituents. The effect of martensite content on deformation and fracture was investigated.
Keywords
Dual phase steel; cooling regime; Mechanical Properties; martensite volume fraction; high strain rate tensile and fracture feature
Statistics
Article View: 254
PDF Download: 874