Effect of HYL Process Parameters on the Quality of Iron Ore Reduction | ||
| Journal of Petroleum and Mining Engineering | ||
| Article 6, Volume 18, Issue 1 - Serial Number 97, 2016, Pages 54-60 PDF (658.72 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jpme.2016.37810 | ||
| Authors | ||
| Mahmoud Ahmed1; Mohamed Shahin2; Mohamed Elzeky2; Mohamed Ahmed3 | ||
| 1Suez Steel Company, Add: Egypt, Suez, Attaka, Adabeyah road | ||
| 2Department of Metallurgical and Materials Engineering, Suez University, Suez 43512 | ||
| 3Department of Metallurgical and Materials Engineering, Suez University, Suez 43512 Department of Mechanical Engineering,The British University in Egypt, El-Sherouk City, 11837 Cairo, Egypt | ||
| Abstract | ||
| In this work the effect of a number of HYL process parameters on direct reduced iron (DRI) quality, during a real process taking place at Suez Steel Company have been studied. These parameters are gas temperature at reactor inlet and at heater outlet, process gas flow rate, oxygen flow rate at partial combustion zone, reducing gases ratio, humidity percent in process gas, cooling gas flow rate and natural gas make-up for cooling gas. By changing these parameters, then by calculating the DRI quality (metallization and carbon content percentages ) after the residence time , I has been found that the metallization degree increases with the increase of gas temperature at reactor inlet and at heater outlet , process gas flow, oxygen flow at partial combustion zone, reducing gases ratio, humidity percent in process gas. Also increasing of cooling gas flow rate and natural gas make-up for cooling gas has caused increase a carbon content. | ||
| Keywords | ||
| HYL Zero Reformer Process; Iron Ore Reduction | ||
|
Statistics Article View: 568 PDF Download: 1,352 |
||
