PRODUCTION OF BIMETALLIC AND TRIMETALLIC MATERIALS BY EXPLOSION WELDING AND ALLIED PROCESSES | ||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||
| Article 33, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Pages 48-60 PDF (762.32 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/amme.2008.39065 | ||
| Authors | ||
| TURŇA M.; NESVADBA P.; ROLC S.; ČAPLOVIČ Ľ.; TURŇOVÁ Z. | ||
| Faculty of Materials Science and Technology, Slovak University of Technology Bratislava, Trnava, Slovak Republic. | ||
| Abstract | ||
| ABSTRACT The paper and talk deal with the research results in the field of welding the combined metals such as Ti-Cu, Ti-Al, Sn-Cu, Al-Mg alloy, Monel-steel, Pb-steel, AlSi alloy-Cu, Ta-Monel, Ta-Stainless Steel, Monel-Ta, steel-Ti-Al, steel-Cu-Al, etc., as well as the processes allied. The combinations that are not mentioned in the paper will be presented during the talk. The results were attained in collaboration with the Research Institute of Industrial Chemistry, Pardubice-Semtin (Czech Republic) and the Slovak University of Technology, Department of Welding, Faculty of Materials Science and Technology, Trnava (Slovak Republic). The bimetals and trimetals were produced using the Semtex S explosive. The quality of joints was evaluated by ultrasonic detection, optical microscopy, microhardness measurements and X-ray microanalysis. | ||
| Keywords | ||
| Explosion Welding; Explosive; Welding Metals; Welding Parameters; Bimetal; Trimetal; quality control | ||
|
Statistics Article View: 137 PDF Download: 233 |
||
