THE INFLUENCE OF TWO STEAM STERILIZATION PARAMETERS ON THE DIMENSIONAL STABILITY OF 3D PRINTED SURGICAL GUIDE (IN VITRO STUDY) | ||
| Alexandria Dental Journal | ||
| Articles in Press, Corrected Proof, Available Online from 09 November 2024 PDF (391.03 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/adjalexu.2024.292052.1509 | ||
| Authors | ||
| Mohamed Ahmed Bassiony* 1; Yousria Attia Shalaby2; Amir Shoukry Azer3; Rewaa AboElhassan4 | ||
| 1Conservative Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt. | ||
| 2Conservative Dentistry Department, Faculty of Dentistry, Alexandria University | ||
| 3Conservative dentistry, Alexandria University, Alexandria, Egypt | ||
| 4Conservative Department, Faculty of Dentistry, Alexandria University | ||
| Abstract | ||
| Background: Advanced manufacturing techniques, known as three-dimensional (3D) printing, use computer-aided digital design models to automatically produce customized three-dimensional objects. Objective: The purpose of this study was to evaluate the effects of two different sterilizing methods on the dimensions of a 3D-printed surgical guide for implant treatment. Methods: Based on the parameters of the sterilizing procedure, we conducted a controlled study with a prospective design on surgical guides, randomly dividing them into two groups of 13 specimens each. Group I underwent steam sterilization for 15 minutes at 121 °C, whereas Group II underwent sterilization for 10 minutes at 134 °C. Results: Before autoclaving, Group I and Group II did not differ statistically significantly in area or perimeter (p = 0.128, p = 718). The percent change in area between the research groups compared pairwise showed a significant difference (p < 0.0001) between each group pair. The percentage changes in the area and perimeter between Group I and Group II were found to differ considerably (p < 0.0001). Conclusions: The results of this investigation unequivocally show that steam sterilization procedures have a substantial impact on the stability and dimensional correctness of 3D-printed surgical guides. carefully choose settings to reduce distortion, even though sterilizing is essential. At 121°C for 15 minutes, steam sterilization appears to provide the best blend of microbiological inactivation and guide integrity preservation. Compression and shrinking are still possibilities. | ||
| Keywords | ||
| Steam Sterilization; Dimensional Stability; 3d Printed; Surgical Guide | ||
|
Statistics Article View: 50 PDF Download: 71 |
||
