The benefits of using 3D CAD software to modify clothing virtual prototype | ||
| International Design Journal | ||
| Article 33, Volume 15, Issue 2 - Serial Number 66, March and April 2025, Pages 415-426 PDF (366.38 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/idj.2025.347787.1242 | ||
| Author | ||
| Shaimaa Mostafa Mohamed* | ||
| Apparel Department, Faculty of Applied Art, Helwan University | ||
| Abstract | ||
| The automated garment pattern making system plays a crucial role in increasing development efficiency and achieving a sustainable environment. In traditional methods, processes must be repeated multiple times to prepare 3D clothing samples, leading to increased time, effort, and costs. This research addresses the following questions: What is a clothing sample, what are its implementation requirements, and what are its types? How effectively does the CLO 3D program create prototype samples? How can the Gerber program be integrated with CLO 3D to produce the best garment sample? The significance of this research lies in keeping pace with technological advancements by applying the latest technologies in advanced product fields, and reducing time, effort, and cost wastage through 3D technologies instead of traditional methods. The research aims to define garment samples, their requirements, and types, maximize the benefits of 2D and 3D software for obtaining virtual garment samples, and overcome errors caused by adjusting the prototype using only the CLO 3D program. The research hypotheses involve the possibility of combining the Gerber program with CLO 3D to achieve the best garment sample, and the use of 2D and 3D software to reduce costly errors before garment execution. Two complex models were selected for the experimental work. A questionnaire containing four main axes was designed to assess the research factors and validate the hypotheses. The results were statistically analyzed using SPSS, and high evaluations of the main axes confirm the success of the research hypotheses. | ||
| Keywords | ||
| Garment virtual prototype; Apparel industry; Gerber program; CLO 3D program | ||
|
Supplementary Files
|
||
| References | ||
|
1- Abdo, N.; Aborady, A. (2020): Using CLO 3D program to evaluate the basic flat adolescence, Architecture, Art & Humanistic Science, VOl. 5, Issue 22 2- Ahmed, Sh. Mostafa (2014): Virtual reality as an innovative technique for sample development in the apparel industry, Ph.D. thesis, Faculty of Applied Arts, Helwan University. 3- Cynthia L. Regan (2008): Apparel product design and merchandising strategies, Bennett Books Ltd (LOS ANGELES, CA, U.S.A. 4- Farag, F.; Debas, R.; Salim, Sh. (2017): A Comparison between Manual and 3D Programs methods in Female Trouser Flat Pattern Drawing, International Design Journal, Vol. 7, Issue 4. 5- Jevsnik S.; Pilar T.; Stjepanovic Z.; Rudolf A. (2015): Virtual Prototyping of Garments and their Fit to the Body, Faculty of Mechanical Engineering, University of Maribor, Https://www.researchgate.net. 6- Jin P.; Fan J.; Zheng R.; Chen Q.; Liu L.; Jiang R.; Zhang H. (2023): Design and Research of Automatic Garment-Pattern-Generation System Based on Parameterized Design, Sustainability 2023 , 15, 1268. https://doi.org/10.3390/ su15021268 7- Lee, J.; Steen, C. (2010): Technical Sourcebook for Apparel Designer, Fairchild Books Store. 8- Mohsen, A. Abdullah (2020): The Effect of using the Gerber program in providing the skills of drawing and grading skirt pattern and the student’s satisfaction with it, Journal of Applied Arts & Science, Vol. 4, October 2020, Damietta University. 9- Nofal, Kh. (2010): Virtual reality technology and its educational use, Dar Al-Manhaj for publication and distribution, 1St Edition, Cairo. 10- Stjepanovic Z.; Pilar T.; Rudolf A.; Jevsnik S.:(2015): 3D Virtual Prototyping of Clothing Products, Faculty of Mechanical Engineering, University of Maribor, Https://www.researchgate.net. 11- Waheed, S. Ahmed (2009): Virtual Reality Technologies as a Tool in Presentation and Evaluation of Metal Products Design, Master Thesis, Faculty of Applied Arts, Helwan University, Egypt. 12- Wanger, T.da Siva, Doering, M., Flosdorff, M. (2019): Virtual Reality in the Product Development in the Fashion Industry, M.Sc. Thesis, The Swedich School of Textiles, University of Boras. 13- https://www.clo3d.com/en/. 14- https://www.lectra.com/sites/default/files/2023-03/solution-brochure-accumark-en.pdf | ||
|
Statistics Article View: 120 PDF Download: 103 |
||
