Romyia, A., Bayomi, R. (2025). Requirements for using satin fabrics in evening wear through studying the effect of stitch length.. test, 15(2), 13-18. doi: 10.21608/idj.2025.413587
Aya Fathy Abdel Hamid Ahmed Romyia; Rasha Bayomi. "Requirements for using satin fabrics in evening wear through studying the effect of stitch length.". test, 15, 2, 2025, 13-18. doi: 10.21608/idj.2025.413587
Romyia, A., Bayomi, R. (2025). 'Requirements for using satin fabrics in evening wear through studying the effect of stitch length.', test, 15(2), pp. 13-18. doi: 10.21608/idj.2025.413587
Romyia, A., Bayomi, R. Requirements for using satin fabrics in evening wear through studying the effect of stitch length.. test, 2025; 15(2): 13-18. doi: 10.21608/idj.2025.413587

Requirements for using satin fabrics in evening wear through studying the effect of stitch length.

International Design Journal
Article 2, Volume 15, Issue 2 - Serial Number 66, March and April 2025, Pages 13-18    PDF (1.03 M)
Document Type: Original Article
DOI: 10.21608/idj.2025.413587
Authors
Aya Fathy Abdel Hamid Ahmed Romyia1; Rasha Bayomi2
1Lecturer, Apparel Design & Technology Department, Faculty of applied arts, Helwan University.
2Lecturer, Apparel Design & Technology Department , Faculty of Applied Arts, Helwan University
Abstract
Satin weave fabrics are commonly used in evening gowns, where a close fit is often required. However, issues such as fabric tearing and seam slippage have been observed, particularly when sitting, likely due to the horizontal expansion of the body in this position. This can exert stress on the fabric’s weave structure or the stitching lines. Therefore, the aim of this study is to examine the strength of Atlas fabric (type 4) as well as the stitching performance relative to stitch length. The study reached the following conclusions:The strength of the Atlas fabric used is significantly higher than the strength of the various stitching lines; therefore, the likelihood of the fabric tearing along the stitching lines is unlikely. The strength of a stitching line with a stitch length of 3 mm is higher than that of a stitch with a length of 5 mm, whether in the warp or weft direction. Furthermore, the work required to cut a stitching line with a 3 mm stitch length is higher than that for a 5 mm stitch length, whether in the warp or weft direction.
Statement of the Problem: Satin weave fabrics have been used widely for evening and wedding gowns, due to its shiny appearance. However, problems such as fabric tearing and seam slippage have been noticed, especially while sitting or sudden body movements, remained problems facing the consumer and requires studying it and trying to find solutions to avoid it.
Objectives: This research aims to achieve the following:  - To study the properties of satin fabrics.  -To study the reasons for seam slippage in satin fabrics when sitting and moving.
- To study the seam performance in relation to the stitch length. - To establish recommendations to avoid the seam slippage in satin fabrics
Significance: Importance of the research: Studying the problem of fabric tearing and seam slippage of satin fabrics, which appear frequently in evening gowns that require close fit
Methodology: Descriptive analytical method and Experimental method
Keywords
Satin Fabrics; Evening Wear; Stitch Length
Supplementary Files
References
  1. Idah Hadijah, Endang Prahastuti, Anik Dwi “ Analysis of Dress Pattern of Body Fitting WithoutWaist Dart on Chiffon Fabrics “Advances in Social Science, Education and Humanities Research, volume 242,2nd International Conference on Vocational Education and Training (ICOVET 2018)
  2. Shaeffer, s.,& C Fabric sewing guide,Chilton book co. Randor, Pennsylvania, U.S.A.,1994
  3. Silberbery, L., & Martin The art of dress modeling, butter Worth Heinemann, Ltd. Linaer house, Jardn hill, Oxford, 1992.
  4. https://www.asiaholic.net/?p=16393
  5. https://www.elfann.com/news/show/
  6. https://www.fashionied.com/industry/%D8%A7%D9%84%D8%B3%D8%A7%D8%AA%D8%A7%D9%86/
  7. Nasr, A., & Al-Zoghbi, K. (2000). Studies in textiles. Dar Al-Fikr Al-Arabi.
  8. [8] Shoukry, N. M., & Momen, M. (2001). Forming on the mannequin: Its evolution, elements, foundations, methods, and contemporary techniques (1st ed.). Dar Al-Fikr Al-Arabi.
  9. Shaker, R. A. (2007). A study of some decorative techniques to enhance the aesthetic values of evening wear made from silk fabrics (Doctoral dissertation, Faculty of Home Economics, Menoufia University).
  10. Basyouni, R. I. (2003). Utilizing Roman art to innovate modern designs suitable for evening wear (Master’s thesis, Faculty of Home Economics, Menoufia University).
  11. Al-Najjar, A. I. (2006). The effect of different structural compositions and designs on the functional performance properties of women’s evening wear (Doctoral dissertation, Faculty of Home Economics, Menoufia University).
  12. Abdel Raouf, M. H. (2009). Utilizing aesthetic elements of military attire in embellishing evening dresses during the Crusader campaigns (Master’s thesis, Faculty of Home Economics, Menoufia University).
  13. Hassan, L. H. (2009). The effect of machine embroidery techniques on the appearance of satin fabrics. Journal of Specific Education Research, 14, 1-20. University of Mansoura.
  14. Al-Nahas, R. A. R. (2015). Sewing techniques of satin fabrics with perforated fabrics in evening wear. International Journal of Design, 5(1), 23-40.
  15. Suleiman, H. S. (2020). Measuring the effect of fabric drape coefficient on the final shape of some women’s outerwear. International Journal of Design, 10(1), 15-30.
Statistics
Article View: 120
PDF Download: 107