Enhancing the Comfort Properties of Headscarf Fabrics for Chemotherapy Patients Using Phase Change Materials | ||
| International Design Journal | ||
| Article 3, Volume 15, Issue 3, May and June 2025, Pages 37-47 PDF (610.34 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/idj.2025.419576 | ||
| Authors | ||
| Hafez S. Hawas1, 2; Eman Zaher Goda2 | ||
| 1Spinning and Weaving Dept., Faculty of Applied Arts, Helwan University, Giza, Egypt | ||
| 2Faculty of Energy and Industrial Technology, October Technological University, Giza, Egypt | ||
| Abstract | ||
| Hair loss (Alopecia) caused by chemotherapy is a prevalent and distressing side effect that many cancer patients experience. It can cause psychological problems including poor self-esteem and social withdrawal. Chemotherapy can also interfere with the body's natural ability to regulate its temperature, leading to uncomfortable physical sensations of extreme heat or cold. The main objective of this research is to create head covering materials that use Phase Change Materials (PCMs) to reduce these symptoms. These PCM-based textiles are designed to improve patient comfort and well-being during chemotherapy by preserving an even and comfortable temperature around the scalp. Four samples were produced using three weft materials blended as following; (50 % Viscose PCM: 50 % Lyocell, and 50 % Viscose PCM: 50 % Bamboo), using two weave structures (Matt Rib 2/2 and Piqué), then the laboratory tests were applied to assess comfort and heat capacity properties for the produced samples. Fabric Air Permeability, Stiffness, Horizontal Wicking, Water Vapor Permeability, Differential scanning calorimetry (DSC) and the porosity percentage of the fabrics were all assessed. Results revealed that Piqué weave enhances air permeability and reduces fabric stiffness, with Bamboo weft achieving the highest air flow and lowest stiffness. Lyocell excels in moisture vapor transport, horizontal wicking, and latent heat properties. Matt Rib weave improves horizontal wicking and latent heat, with fabric weight directly affecting heat capacity. | ||
| Keywords | ||
| Chemotherapy; Alopecia (hair loss); Medical textile; Comfort properties; phase change materials (PCMs); Latent heat | ||
|
Supplementary Files
|
||
| References | ||
|
[1] C. Byrne, “Technical textiles market – an overview,” Handb. Tech. Text., pp. 1–23, 2000, doi: 10.1533/9781855738966.1.
[2] S. Zhezhova, S. Jordeva, S. Golomeova-Longurova, and S. Jovanov, “Application of technical textile in medicine,” Tekst. Ind., vol. 69, no. 2, pp. 21–29, 2021, doi: 10.5937/tekstind2102021z.
[3] A. R. H. and S. C. Anand, Handbook of Technical Textiles, 1st ed. Woodhead Publishing Limited in association with The Textile Institute, 2000. doi: 10.1533/9781855738966.372.
[4] I. I. of T. Delhi, “Industry in India Technical Textiles Industry in India, Opportunities and Challenges, Baseline Study,” 2020.
[5] National Composites Network, “Best Practice Guide: Technical Textiles and Composite Manufacturing”.
[6] Z. Ahmad, M. S. Naeem, A. Jabbar, and M. Irfan, “Fibers for Other Technical Textiles Applications,” Top. Mining, Metall. Mater. Eng., no. August, pp. 201–220, 2020, doi: 10.1007/978-3-030-49224-3_10.
[7] S. Marwaha, V. Satyam, and A. Kulkarni, “Emerging Opportunity in Technical Textiles,” Asian Textile Journal, vol. 15, no. 6. pp. 81–86, 2006.
[8] R. Guru, A. Kumar, D. Grewal, and R. Kumar, “Study of the ImplanTable and Non-ImplanTable Application in Medical Textile,” Next-Generation Text., pp. 1–14, 2023, doi: 10.5772/intechopen.103122.
[9] Selim Molla, Md Minhajul Abedin, and Iqtiar Md Siddique, “Exploring the versatility of medical textiles: Applications in implanTable and non-implanTable medical textiles,” World J. Adv. Res. Rev., vol. 21, no. 1, pp. 603–615, 2024, doi: 10.30574/wjarr.2024.21.1.0058.
[10] S. Akter, A. Y. M. A. Azim, and M. A. Al Faruque, “Medical textiles: significance and future prospect in Bangladesh,” Eur. Sci. Journal, ESJ, vol. 10, no. 12, pp. 1857–7881, 2014, [Online]. Available: https://eujournal.org/index.php/esj/article/view/3196
[11] S. M. Maruf Hasan, M. Shahjalal, J. H. Mridha, and A. M. R. Alam, “Medical Textiles: Application of ImplanTable Medical Textiles,” Glob. J. Med. Res., pp. 17–24, 2019, doi: 10.34257/gjmrkvol19is4pg17.
[12] H. M. Mrcsed and C. Fti, “Sustainable Medical Textiles”.
[13] Wen Zhong, “An Introduction to Healthcare and Medical Textiles,” Ph.D. University of Manitoba, 2021. doi: 10.1201/9781003170570.
[14] M. M. Pritom et al., “Phase change materials in textiles: synthesis, properties, types and applications – a critical review,” Text. Res. J., 2024, doi: 10.1177/00405175241246822.
[15] T. Ponnapally, T. Bathula, and G. Dornala, “DEVELOPMENT OF PCMs BASED TEXTILES FOR MILITARY APPILCATIONS,” Int. Res. J. Eng. Technol., vol. 6, no. 3, pp. 2107–2116, 2019.
[16] E. Khalil, “Application of Phase Change Materials in Textiles: A Review,” Int. J. Res. Rev., vol. 2, no. 5, p. 281, 2015, [Online]. Available: www.ijrrjournal.com
[17] S. Nagar and P. K. Singh, “A short review on the Industrial applications of phase change materials,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1116, no. 1, p. 012006, 2021, doi: 10.1088/1757-899x/1116/1/012006.
[18] A. Sharma, Nanocomposite Materials for Biomedical and Energy Storage Applications. 2021. doi: 10.5772/intechopen.95130.
[19] F. S. BAYRAKTAR and R. KÖSE, “PHASE CHANGE MATERIALS: TYPES, PROPERTIES and APPLICATIONS in BUILDINGS,” Kırklareli Üniversitesi Mühendislik ve Fen Bilim. Derg., vol. 8, no. 1, pp. 190–210, 2022, doi: 10.34186/klujes.1126167.
[20] M. Zare and K. S. Mikkonen, “Phase Change Materials for Life Science Applications,” Adv. Funct. Mater., vol. 33, no. 12, 2023, doi: 10.1002/adfm.202213455.
[21] S. Hagman, “The Application of Microencapsulated Biobased Phase Change Material on Textile,” 2016, [Online]. Available: https://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-10266
[22] D. H. Elgohary and H. S. Hawas, “Enhancing the comfort properties of military clothing using phase change materials (PCMs) and Bamboo ,” J. Text. Assoc., vol. 82, no. 1, pp. 26–34, 2021.
[23] M. A. Ali, K. M. Seddik, and A. G. Hassabo, “Polyester fibres enhanced with Phase Change Material (PCM) to maintain thermal stability,” Egypt. J. Chem., vol. 64, no. 11, pp. 6593–6613, 2021, doi: 10.21608/ejchem.2021.92104.4367.
[24] E. Z. Mostafa, Shaimaa, “Using Microfibers to Optimize the Functional Properties of Janitorial Staff Uniforms,” Herit. Des. J., vol. 4, no. 1, pp. 1090–1110, 2024, doi: 10.21608/jsos.2024.314550.1613.
[25] H. Mehling, M. Brütting, and T. Haussmann, “PCM products and their fields of application - An overview of the state in 2020/2021,” J. Energy Storage, vol. 51, no. March, p. 104354, 2022, doi: 10.1016/j.est.2022.104354.
[26] J. Bao et al., “Applications of phase change materials in smart drug delivery for cancer treatment,” Front. Bioeng. Biotechnol., vol. 10, no. September, pp. 1–11, 2022, doi: 10.3389/fbioe.2022.991005.
[27] D. Dhingra and T. Agarwal, “Episode IV : PCM AND ITS APPLICATION IN MEDICAL DEVICES AND HEALTHCARE Death Causes in New-borns,” no. May, pp. 1–5, 2019.
[28] M. He et al., “Recent applications of phase-change materials in tumor therapy and theranostics,” Biomater. Adv., vol. 147, no. January, p. 213309, 2023, doi: 10.1016/j.bioadv.2023.213309.
[29] M. S. Aslam, S. Naveed, A. Ahmed, Z. Abbas, I. Gull, and M. A. Athar, “Side Effects of Chemotherapy in Cancer Patients and Evaluation of Patients Opinion about Starvation Based Differential Chemotherapy,” J. Cancer Ther., vol. 05, no. 08, pp. 817–822, 2014, doi: 10.4236/jct.2014.58089.
[30] N. Kumar, “Updated clinical guidelines on the oral management of oncology patients,” Fac. Dent. J., vol. 10, no. 2, pp. 62–65, 2019, doi: 10.1308/rcsfdj.2019.62.
[31] C. Loprinzi, W. Bensinger, and D. Peterson, “Understanding and managing chemotherapy side effects,” pp. 4–7, 2018.
[32] H. K. Chan and S. Ismail, “Side effects of chemotherapy among cancer patients in a Malaysian general hospital: Experiences, perceptions and informational needs from clinical pharmacists,” Asian Pacific J. Cancer Prev., vol. 15, no. 13, pp. 5305–5309, 2014, doi: 10.7314/APJCP.2014.15.13.5305.
[33] N. Prasongsook, “Common side effects of chemotherapy,” Thai Cancer, vol. 21, pp. 1–8, 2016.
[34] Breastcancer.org, “Managing Chemotherapy Side Effects | Breastcancer.org,” Lippincott NursingCenter, no. July, pp. 1–5, 2023, [Online]. Available: https://www.breastcancer.org/treatment/chemotherapy/side_effects
[35] West Midlands Cancer Alliance Systemic Anticancer Treatment (SACT) Expert Advisory Group, “Scalp Cooling Guidelines for Adult Oncology Patients,” pp. 1–12, 2020.
[36] S. Abd El-Moneam Ahmed, W. Ismail Shereif, G. ElSayed Hafez, and Z. Gamal Mohamed Ellatif Abouelezz, “Factors Influencing Using Scalp Cryotherapy to Promote Hair Regrowth in Breast Cancer Patients Receiving Chemotherapy,” Int. Egypt. J. Nurs. Sci. Res., vol. 3, no. 2, pp. 52–71, 2023, doi: 10.21608/ejnsr.2023.277686.
[37] C. Education, “Hair Loss and Your Cancer Treatment,” pp. 1–19, [Online]. Available: https://www.mskcc.org/cancer-care/patient-education
[38] K. M. Kokolus, C. C. Hong, and E. A. Repasky, “Feeling too hot or cold after breast cancer: Is it just a nuisance or a potentially important prognostic factor?,” Int. J. Hyperth., vol. 26, no. 7, pp. 662–680, 2010, doi: 10.3109/02656736.2010.507235.
[39] BC Cancer Agency, “Coping with / Preventing Oxaliplatin Cold Dysesthesias,” pp. 2–3, 2014, [Online]. Available: http://www.bccancer.bc.ca/drug-database-site/Drug Index/OxaliplatinColdDysesthesia_Patient_Handout_1Jan2015.pdf
[40] R. Hughes, “Chemo Side Effects: Temperature Regulation.” https://advancedbreastcancer.net/living/temperature-regulation-side-effect?utm_source=chatgpt.com
[41] Ruchi Garg, “Cancer-related hot flashes and night sweats,” Gynecologic Oncology, City of Hope Atlanta, Chicago and Phoenix. https://www.cancercenter.com/integrative-care/hot-flashes?utm_source=chatgpt.com
[42] K. Aruchamy, S. P. Subramani, S. K. Palaniappan, S. K. Pal, B. Mylsamy, and V. Chinnasamy, “Effect of Blend Ratio on the Thermal Comfort Characteristics of Cotton/Bamboo Blended Fabrics,” J. Nat. Fibers, vol. 19, no. 1, pp. 105–114, 2022, doi: 10.1080/15440478.2020.1731903.
[43] hafez hawas, “A Study on Comfort Properties of Banana / Cotton Blend Woven Fabrics,” J. Des. Sci. Appl. Arts, vol. 2, no. 1, pp. 140–149, 2021, doi: 10.21608/jdsaa.2021.35112.1069.
[44] A. I. Emara, “Improving the Performance of Terry Fabrics to be used as Pilgrimage,” Int. Des. J., vol. 10, no. 3, pp. 397–413, 2020. | ||
|
Statistics Article View: 330 PDF Download: 63 |
||
