Evaluation of Shear Strength of HSRC beams without web reinforcement | ||
| The International Conference on Civil and Architecture Engineering | ||
| Article 7, Volume 11, 11PthP International Conference on Civil and Architecture Engineering, April 2016, Pages 1-11 PDF (789.99 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iccae.2016.43416 | ||
| Authors | ||
| Ahmed I. Ramadan1; Aly G. Aly Abd-Elshafy2 | ||
| 1Ahmed I. RAMADAN, Lecturer (Author) Civil Engineering Dept., Faculty of Engineering / Asiut University, EGYPT. | ||
| 2Civil Engineering Dept., Faculty of Engineering / Asiut University, EGYPT. | ||
| Abstract | ||
| Abstract Currently, there is no general agreement on a theory describing the response of reinforced concrete members without web reinforcement. Many structural systems rely on design is usually performed using empirical or semi-empirical expressions provided by codes of practice that do not consider the influence of many governing parameters. In this paper, a comparison between values of current experimental shear strength and those of various international design approaches have been calculated and analyzed on 18 simple span HSRC deep beams without web reinforcement were tested under monotonic two point loads at the mid span to examine the contribution of various parameters on the shear capacity of HSRC beams like; f International Conference on Civil and Architecture Engineering ICCAE-11-2016 cu=60 MPa, three values of tension reinforcement (0.73%,1.21% &1.83%) and shear span to effective depth ratio ( 2,1.5 &1) were selected to mainly study the behavior of deep beams, where typical shear failure can be anticipated. | ||
| Keywords | ||
| deep beams; HSC; tension reinforcement ratio; shear span to effective depth ratio and shear strength | ||
|
Statistics Article View: 114 PDF Download: 286 |
||
